User's Manual

34
 Set the power scheme to “Power Saving” mode
Wireless LAN connection is disconnected
after 2~3 minutes, and the connection is not
recovered.
Solution: The reason may be caused by channel
interference, change the channel of the AP and reconnect.
The computer is unable to connect to the
Internet.
Solution: Account for Internet service provider (ISP) is
not properly configured. Ask for your ISP assistance.
The Wireless LAN is connected, but I can not
connect to or to another computer.
Solution:
 Check the device driver is properly installed.
 Check that the device driver is properly installed. If the
driver is not properly installed, you will find a yellow
exclamation mark on the network icon by licking Start
> Control Panel > System > Device Manager >
Network Adapters.
If there is a yellow exclamation mark, please reinstall
the device driver with the system software Media.
The signal strength is excellent but cannot
connect to the network.
Solution: Check the TCP/IP properties are configured
properly. When you connect to an AP, click the Wireless
Network Connection icon on the taskbar and select the
Support tab.