Click on the “Browse” tab and select the “SPSystemBacktup” item and click on the “Open” tab. Enter your new password.
Click on the “Browse” tab and select the “SPEmRec Token” item and click on the “Next” tab.
Confirm your password for the selected “Token” and click on the “Next” tab.
The item is selected and click on the “Next” tab. Select on the password for the “Basic User” and click on the “Next” tab.
Click on the “OK” tab. Click on the “Next” tab to complete the process.
The Security Platform is ready to use.
Finger Print The system’s Fingerprint application offers a secure and convenient system for managing your passwords and providing your sensitive data for confidentiality through file encryption. Before You Start From “Start”, click on the “Control Panel” and select the “User Account and Family Safety” , and then select “User Account” item.
Choose “Create a password for your account” 54
Enter your password.
From your system screen, click on the fingerprint icon to activate the application and setting your password. Click on the “Next” button.
Select the “I accept the terms in the license agreement”, Click on the “Next” button. After select install path, Click on the “Next” button.
Input User name, Click on the “OK” button. Select on the finger that you will set for your fingerprint identification.
Swipe your finger to set the fingerprint.
the sensor to achieve the best contact. Start swiping your finger from the bend closest to the fingertip. Do not lift your finger as you swipe over the sensor. You will be allowed to perform the test 5 times.
Help file contents 61
Troubleshooting This chapter describes locating and solving problems that you may encounter while using your computer. General Hardware Problems / Possible Cause and Solution A few common hardware problems and suggested solutions are presented in the table below: A freeze on the system during program operation An error occurs during program currently being used. Press the SAS key of your Tablet PC. Solution: An error with the Windows OS. Reboot the system using the Power button.
The LCD screen is too dark or too bright Solution: Adjust the LCD brightness. Press the Mobility Center button and click on Brightness Up or Brightness Down. Beeping sound Solution: Connect the computer to an external power source immediately. The system can not shutdown properly Solution: Press and hold the power button for 4~6 seconds until the system shutdown manually.
Wireless LAN connection is disconnected after 2~3 minutes, and the connection is not recovered. Solution: The reason may be caused by channel interference, change the channel of the AP and reconnect. The computer is unable to connect to the Internet. Solution: Account for Internet service provider (ISP) is not properly configured. Ask for your ISP assistance. The Wireless LAN is connected, but I can not connect to or to another computer. Solution: Check the device driver is properly installed.
Contacting Your Dealer If you still have a problem after reading the preceding section, the next step is to contact your dealer. Your dealer can determine if the problem is something that requires the computer to be taken to the shop. Before you call your dealer, however, please have the following information available: Solution: How is your computer configured? Your dealer needs to know what peripheral devices you are using.
This will reduce the damage to the system As a special reminder, be sure not to put the computer inside the carry bag that has stain in sending the computer for repair The system can’t resume operation Solution: Malfunction of external memory or internal memory – an error will occur during saving into the system memory, it will not execute normal operation External peripheral connected to the system not compatible – such as external USB devices, compact flash, MMC, Smart Media are complicated devices will