Specification

SMART CONTROL
®
ENERGY-SAVING
TAMPER-RESISTANT
FEATURE-RICH
Built to succeed,
Smart Control features:
• Diagnostic error codes
to assist in troubleshoot-
ing
• 24 or 120 volt input
capability
• Built-in relays with
replaceable fuses
• An intelligent "Memory
Save" feature that elimi-
nates post-outage resets
• Low-voltage capability to
guard against shutdown
during brownout
conditions
• Color-coded and clearly
labeled wire leads for
ease of installation
When the subject turns to performance, AMTROL’s Smart
Control unit rewrites the manual. It comes complete with a
tamper-resistant setting and a post-purge feature that
produces energy savings of up to 15% – savings that translate directly into 200 free
showers, 160 loads of whites, or 100 whirlpool baths.
Smart Control is remarkably adjustable.
In addition to its energy-saving adjustable boiler post-purge,
the unit incorporates both adjustable boiler pre-purge (0, 1, 3
and 5 minutes) and adjustable thermostat differential
(5 or 10 degrees).
Smart Control makes installation, set-up and operation
exceedingly easy.
• Same-color wiring and temperature sensors make
installation and retrofit simple.
• Separate Mode, Up, and Down buttons simplify
setting procedure.
• A large illuminated LED readout monitors heat
transfer and displays diagnostic error codes to assist
in rapid troubleshooting.
T
ake contr
ol with Smart Contr
ol.
Only from AMTROL.
®
Corporate Headquarters
1400 Division Road
West Warwick, RI 02893
Telephone: [phone]
Fax: [phone]
AMTROL Canada, Ltd.
275 Shoemaker Street
Kitchener, Ontario N2E 3B3
Telephone: [phone]
Fax: [phone]
www.amtrol.com
PN: 9040-608 REV B MC# 9634 (2/06) ©2006 AMTROL Inc. BoilerMate is a trademark of AMTROL Inc.