User manual

Amtune HDMI Matrix user manual

(form 1 e.g. AM-HM808)

One time pressing to switch next channel for each button,

such as if need DDC6&TMDS6 to show the 4

source, just

press the button “F”, when the number above the “F” on

front display switch to “4”, it is means the6

(DDC6&TMDS6)

displayer is showing the 4

source.

Following is the front displayer for reference. (photo 1)

(photo 1 e.g. AM-HM808)

4.5 Switching HDMI Matrix at end displayers:

Connect IR receiver to each of TL3010 IR port, put the

IR receiver’s head at the right place, then control

different 8 sources by switching “F1~F8” on the remote

control. E.g. need the 7th source, just press “F7”.

4.6 Control the program in one source at the end

displayer:

Connect IR receiver to each of TL3010 IR port, put the

IR receiver’s head at the right place, and connect the IR

transfer head from No. 1 ~ 8 to each source’s infrared

sensor close. Then can control STB/DVD program by IR

control at end displayers.

4.7 Control HDMI Matrix by RS232

Connect RJ45-RS232 with your control machine, and

then control HDMI Matrix by RS232 protocol, check