Use and Care Manual

7 APRIL 2020
www.amvicsystem.com
BUILD TO A HIGHER STANDARD
501 McNicoll Avenue Toronto, ON, CA, M2H 2E2
Toll Free: 1 [phone] • Fax: [phone]
PRODUCT DATA SHEET MULTIPURPOSE EPS
Multipurpose EPS Insulation Panels
HIGH DENSITY INSULATION
Amvic Advantage
• Suitable for use in both above and
below grade applicaons in residenal,
commercial, agricultural and industrial
construcon.
• Exceponal Long-Term Thermal Resistance
(LTTR) and increased R-Value in lower
temperatures.
• High vapor permeance allowing wall
assemblies to dry over me.
• No o-gassing and does not contain HFCs,
CFCs or HCFCs.
• Each panel is easy to handle due to the low
weight, smaller size and can be easily cut.
• Provides addional protecon to the
waterproong during the backll stage
when used on exterior of foundaon wall.
• Load capacity of panels is 3000 pounds per
square foot.
Amvic's mulpurpose rigid insulaon is a Do-
It-yourself (DIY) molded panel using closed cell
Expanded Polystyrene (EPS) with one at face. The
second face of the panel has bi-direconal channels
that can be used as either venng or water drainage,
depending on the applicaon.
The combinaon of high density EPS and moisture
management paern oers a highly versale product.