User's Manual

WAVE 2
-Way Wireless Accessories and Adapters for Touch Panels Pre-Installation 17
Pre-Installation
Overview
Before installing the wireless communications equipment, set the AXR-WAVES
GROUP ADDRESS DIP switch. Then, set the GROUP ID DIP switches for the AXR-
WAVES, WAV-LNK, WAV-PK, and WAV-PKM. Figure 18 shows the DIP switches
on the AXR-WAVES front panel.
AXR-WAVES (or WAV-LNK) Group Address DIP Switch
A single AXR-WAVES server can communicate with up to 16 wireless devices. The
8-position GROUP ADDRESS DIP switch sets the starting address (+ 15) for the
group device numbers. For example, if the DIP switch is set to 128, the AXR-WAVES
(or WAV-LNK) allocates device numbers 128 through 143 (128+15). The Group Ad-
dress DIP switch setting on the WAV-LNK must be set identical to the Group Ad-
dress switch setting on the AXR-WAVES server.
Device numbers for the WAV-PK and the WAV-PKM commonly begin at 128 and
are set using touch-screen menus on the full-sized and mini-touch panels. Refer to
the instruction manual supplied with your touch panel for detailed information.
Figure 18
AXR-WAVES front panel
Note
Device numbers must fall
within the device number
range set on the AXR-
WAVES.
Note
Settings of both DIP switches
on the AXR-WAVES must
match both DIP switch settings
on the WAV-LNK for proper
operation.