User's Manual

2 Introduction WAVE 2-Way Wireless Accessories and Adapters for Touch Panels
Additionally, the WAV-LNK WaveLink transceiver (Figure 2) may be used in con-
junction with one or more WAV-PM modules when a UniMount or rack mounted
touch panel is used in a remote, wireless application. The WAV-LNK is ideal for Un-
iMount touch panels mounted in podiums or lecterns where cabling is of concern.
Features
The major features for the AXR-WAVES, WAV-LNK, WAV-PK, and WAV-PKM are
described in the following paragraphs. Additionally, information for the WAV-PM
power module is provided.
What’s in this Manual
This manual comprises the following sections:
Pre-Installation Settings Describes how to set the GROUP ADDRESS and
GROUP ID DIP switches.
Installation Describes how to install and wire the AXR-WAVES, WAV-PK,
WAV-PKM, WAV-PM, WAV-BP, and WAV-BPM.
Firmware Upgrade Provides the disassembly and installation requirements
for upgrading the AXR-WAVES, WAV-PK, and WAV-PKM firmware integrated
circuits (ICs).
Specifications Briefly describes the AXR-WAVES, WAV-PK, WAV-PKM,
WAV-PM, WAV-BP, and WAV-BPM specifications for each unit.
Technical Support Lists the telephone numbers to contact Sales and Techni-
cal Support.
Figure 2
WAV-LNK transceiver