Instruction manual

Product Overview and Specifications
28
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
* S/PDIF specifications do not apply to the Multi-Format TX.
AMX reserves the right to modify its products and their specifications without notice.
Local Audio Specifications
TX Input
Input Signal Types Stereo analog, S/PDIF*
Video signal must be present to pass audio
Analog Input Level (max.) +2 dBu, unbalanced
Analog Input Impedance 10 kohms
Analog to Digital Conversion 48 kHz sample rate, 24-bit
S/PDIF Audio Format Support Dolby Digital, DTS, 2 CH L-PCM
S/PDIF Resolution* 16 to 24 bit
S/PDIF Sample Rate* 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
S/PDIF Input Signal Level Range* 200 mVpp to 600 mVpp terminated
S/PDIF Input Impedance* 75 ohm
Analog to Digital Reference Level +2.5 dBu = 0 dBfs
Connector • 3.5 mm mini-stereo jack (analog stereo)
• RCA jack (S/PDIF)*
RX Output
Output Signal Types Stereo analog
Analog Output Level (max.) +2 dBu, unbalanced
Analog Output Frequency Response <+0 dB to -0.5 dB, 20 Hz to 20 kHz
Analog Audio Output THD+N <0.03%, 1 kHz, -10 dBu to +2 dBu
Analog Audio Out SNR >85 dB, 20 Hz to 20 kHz, Vin = +2 dBu
Audio Synchronization Video Formats @ 60 Hz frame rate: Audio is actively delayed to
match video within 9 ms leading to 10 ms lagging when scaling.
When in Bypass Mode, the audio is matched to video within
1 ms.
Connector 3.5 mm mini-stereo jack (analog stereo)
Local Audio
Specifications