Instruction manual

NetLinx Programming of DXLink Transmitters and Receivers
72
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
In NetLinx Studio’s OnLine Tree, the DXLink Transmitters and Receivers each display seven ports.
Note: For additional information on using NetLinx Studio, refer to the “Operation/Reference Guide –
NetLinx Studio v3.3” and the “WebConsole & Programming Guide – NetLinx Integrated Controllers”
(available at www.amx.com).
Note: All command text is based on a Unicode index.
FIG. 33 NetLinx Studio OnLine Tree - Ports 1 through 7 on a DXLink HDMI Transmitter and Receiver
Ports 1-7 on DXLink Transmitter
(device number 05400)
Port 1 - Serial ICSP (COM)
Port 2 - Not used
Port 3 - IR Output*
Port 4 - IR Input*
Port 5 - USB (HID) input and output
Port 6 - Audio/Video Output
Port 7 - Audio/Video Input
Ports 1-7 on DXLink Receiver
(device number 05300)
Port 1 - Serial ICSP (COM)
Port 2 - Not used
Port 3 - IR Output
Port 4 - IR Input
Port 5 - USB (HID) host data
Port 6 - Audio/Video Output
Port 7 - Audio/Video Input
* IR Input and Output ports are
not used on the Wallplate TX.
DXLink Transmitter
DXLink Receiver
Port 8 - Analog Video Input
(Multi-Format TX and Wallplate TX)
Port 8 - Analog Video Input
(Multi-Format TX and Wallplate TX)
Port details for TX and RX in NetLinx Studio