Instruction manual

Important Safety Information and Instructions
2
DXLink™ Twisted Pair Transmitters/Receiver Instruction Manual
Important Safety Information and Instructions
When using and installing your AMX product, adhere to the following basic safety precautions.
For more information about operating, installing, or servicing your AMX product, see your
product documentation.
Read and understand all instructions before using and installing AMX products.
Use the correct voltage range for your AMX product.
There are no user serviceable parts inside an AMX product; service should only be
done by qualified personnel.
If you see smoke or smell a strange odor coming from your AMX product, turn it off
immediately and call technical support.
For products with multiple power supplies in each unit, make sure all power supplies
are turned on simultaneously.
Use surge protectors and/or AC line conditioners when powering AMX products.
Only use a fuse(s) with the correct fuse rating in your enclosure.
Make sure the power outlet is close to the product and easily accessible.
Make sure the product is on or attached to a stable surface.
Turn off equipment before linking pieces together, unless otherwise specified in that
product’s documentation.
For safety and signal integrity, use a grounded external power source and a grounded
power connector.
To avoid shock or potential ESD (Electrostatic Discharge) damage to equipment,
make sure you are properly grounded before touching components inside an AMX
product.