Instruction manual

Enova DGX DVI Boards
75
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
Enova DGX DVI Boards – Specifications
Applies to input board FG1058-600 and output board FG1058-610.
* Cable distance support is dependent on cable type and signal format.
Note: Interlaced and progressive video are supported into the HDMI Input Board; progressive video is
only supported out of the HDMI Output Board, unless in non-scaling bypass mode.
AMX reserves the right to modify its products and their specifications without notice.
Digital Video – DVI Specifications
Parameter Value
Compatible Formats DVI, HDCP
Signal Type DVI-D (single link)
HDMI (with DVI cable adapter)
DisplayPort ++ (input only, with DVI cable adapter)
HDMI Mode Support DVI Boards can be run in HDMI mode with an EDID update which will
provide full HDMI functionality and board specifications
Video Data Rate (max.) 4.95 Gbps (6.75 Gbps for HDMI Mode)
Video Pixel Clock (max.) 165 MHz
Progressive Resolution Support 480p up to 1920x1200 @ 60 Hz
Interlaced Resolution Support 480i, 576i,1080i
2K Resolution Support 2048x1024 @ 47 Hz, 2048x1080 @ 60 Hz, 2048x1152 @ 60 Hz,
2048x1536 @ 24 Hz
• 2K formats are only compatible with DVI and HDMI Input/Output Boards
and require the output scaler to be set in Bypass mode
Input Equalization Yes, adaptive up to 100 ft. (30 m) at 165 MHz*
Input Re-clocking (CDR) Yes
Output Re-clocking Yes
Output Scaling SmartScale, Manual Configuration, Bypass
SmartScale Output Resolution
Support
All resolutions between 480p and 1920x1200 @ 60 Hz via automatic
SmartScale query of the display’s declared EDID Detailed Timing
Definition
Color Depth Support 24-bit
Color Space Support RGB 4:4:4
Local Audio Support Yes, insertion and/or extraction of 2 CH L-PCM selectable by channel
DDC/EDID Support EDID provided by the Enova DGX Digital Media Switcher
EDID is user re-programmable
HDCP Support Yes, full matrix HDCP support (includes any input to any or all outputs,
except for SC Optical Inputs and Outputs)
• Key Management System
• AMX HDCP InstaGate Pro® Technology
• Key support up to 16 devices per output, independent of source device
Input Voltage (nominal) 1.0 Vpp differential
Output Voltage (nominal) 1.0 Vpp differential
Output Rise Time / Fall Time 100 ps min. to 200 ps max. (20% to 80%)
0.16 UI min. to 0.33 UI max. (@ 1.65 Gbps,20% to 80%)
Output +5 V DDC Pin 50 mA
DVI Input Board Propagation Delay 2 s
DVI Output Board Propagation Delay 24 ms for progressive, 48 ms for interlaced, 5 s when in Bypass mode
Connector 4 DVI-I ports (DVI-D single link is the supported signal type)