Instruction manual

Appendix B – Managing Configuration Files
120
Epica DGX 16 and Epica DGX 32 Instruction Manual
Navigating the Interface
XNConnect displays configuration information in two panes. The graphics are located in the left pane,
and the properties of the currently selected graphic are in the right pane. At the top of the left pane are
two tabs, Hardware and Virtual Matrices, for accessing the Hardware and Virtual Matrices views
(see below). To see the details and components of a device or a virtual matrix, click the plus “+” symbol
to the left of the device or the virtual matrix.
Most configuration file modifications involve entering information in a series of dialog boxes that are
accessed by right-clicking a hardware device or virtual matrix icon and selecting an option from the
shortcut menu. If you have a question regarding an open dialog box, press the F1 key for Help.
Hardware View
The Hardware view (FIG. 59) displays the system’s hardware, such as enclosures and serial ports. This is
the view used when setting the Control Panel password (see page 121).
Virtual Matrices View
The Virtual Matrices view displays properties of the existing virtual matrices. Most common tasks are
conducted from this view, including creating local presets.
FIG. 59 XNConnect interface with Hardware tab selected
Hardware tab Virtual Matrices tab
Highlighted device
Properties of highlighted device
Device firmware version
Primary
This view will show any linked
Components of the
primary device
device
AMX AutoPatch primary devices
Communication settings