Instruction manual

Epica DGX DVI Boards
54
Epica DGX 16 and Epica DGX 32 Instruction Manual
Specifications Epica DGX DVI
Applies to input board FG1056-520 and output board FG1056-530.
EDID Resolutions Supported through Local DDC
Standard Timings
* This is the preferred timing identified in the EDID.
Established Timings
** Some monitors may not support the maximum refresh rate.
AMX reserves the right to modify its products and their specifications without notice.
Digital Video – DVI Specifications
Parameter Value
Signal Type DVI-D (single link)
Resolution Support 640x480 @ 60 Hz up to 1920x1200 @ 60 Hz
Interlaced Resolution Support 1080i 60, 59.94, 50 (fields per second)
576i 100, 50 (fields per second)
480i 60 (fields per second)
Data Rate (max.) 4.95 Gbps
Pixel Clock (max.) 165 MHz
DDC/EDID Support EDID provided by Epica DGX 16 or 32
EDID is user re-programmable
HDCP Support No
Input Voltage (nominal) 1.0 Vpp differential
Input Cable Equalization Up to 50 ft. (15.24 m)
Output Voltage (nominal) 1.0
Vpp differential
Output Recloc
king Yes
Output +5 V DDC Pin 250 mA
Output Rise Time / Fall Time 80 ps min. to 200 ps max. (20% to 80%)
0.13 UI min. to 0.33 UI max. (@ 1.65 Gbps, 20% to 80%)
DVI Input Board Propagation Delay 1 μs
DVI Output Board Propagation Delay 2 μs
Connector DVI-I (DVI-D single link is the supported signal type)
Standard Timing
Identification
Resolutions Refresh Rate Max.**
ID 1 1920x1200* 60 Hz
ID 2 1920x1080 60 Hz
ID 3 1680x1050 60 Hz
ID 4 1600x1200 60 Hz
ID 5 1280x800 60 Hz
ID 6 1280x720 60 Hz
ID 7 1280x1024 60 Hz
ID 8 640x480 120 Hz
Resolutions Refresh Rate Max.**
640x480 60 Hz, 72 Hz, 75 Hz
800x600 56 Hz, 60 Hz, 72 Hz, 75 Hz
1024x768 60 Hz, 70 Hz, 75 Hz, 87 Hz
1280x1024 75 Hz