Instruction manual

Control Panel Operation
72
Epica DGX 16 and Epica DGX 32 Instruction Manual
Locking and Unlocking
Locking the Epica DGX 16 or 32 Control Panel prohibits access to the system and can prevent accidental
switching. While the panel is locked, BCS commands still work; however, they cannot be used to unlock
the panel. The panel remains locked if the power is cycled.
The password used to lock and unlock the panel consists of a sequence of five input keys. The factory
default password is the first five Input Keys (1-2-3-4-5). A new password can be set using any
combination of five keys from Input 1 through Input 8 (for instructions, see page 76).
Caution: We strongly recommend recording passwords in a secure place; Epica DGX 16 and 32
systems cannot retrieve a lost password.
If the password is lost while the system is locked, contact technical support (see page 42).
Locking the Control Panel
If you enter the wrong password while attempting to lock the Control Panel, the LCD displays “Invalid
Password” and the Cancel Key flashes. Press the Cancel Key to clear the error and enter the correct
password.
Note: For security purposes, the Input Keys do not turn white when pressed while locking and
unlocking the panel.
To lock the Control Panel:
1.
Press the Function Key.
The Function menu appears.
2. Locate Lock Panel by scrolling with the Control Dial.
3. Press the Select Key.
The system is in Lock Mode (Input Keys 1 through 8 turn blue).
4. Press the Input Keys in the following order: 1, 2, 3, 4, 5 (default password).
The panel is locked, and all Input and Output Keys turn off.