Instruction manual

Control Panel Operation
74
Epica DGX 16 and Epica DGX 32 Instruction Manual
2. Locate Setup Options by scrolling with the Control Dial.
3. Press the Select Key.
The Setup Options submenu appears.
Locate Software Version by scrolling with the Control Dial.
4. Press the Select Key again to choose Software Version.
The Software Version Screen appears.
5. Scroll with the Control Dial to see additional Software Version information.
6. Press the Cancel Key to return to the Setup Options submenu.
Or press the Function Key to return to the Function menu.
Default Virtual Matrix
The factory default virtual matrix for the Epica DGX 16 and 32 is VM 0. You have the option of
changing the factory default virtual matrix for your system. When you choose a new default virtual
matrix, the system will revert to that virtual matrix each time the system is powered up even if you
changed the virtual matrix using the V.Matrix list during normal operation. The power must be cycled
before the default virtual matrix changes are implemented. If you want to immediately switch on the
default matrix, either change the current virtual matrix (see page 62) or cycle the power.
The following example changes the default virtual matrix from VM 0 to VM 2, a custom virtual matrix.
To change the default virtual matrix:
1.
Press the Function Key.
The Function menu appears.
2. Locate Setup Options by scrolling with the Control Dial.
3. Press the Select Key.
The Setup Options submenu appears.
Version number