Instruction manual

Octaire Control Panel Operation
60
Octaire Instruction Manual
4. Scroll the Control Dial to see additional Software Version information.
5. Press the Cancel Key to return to the Setup Options submenu.
Or
Press the Function Key to return to the Function menu.
Default Virtual Matrix
The factory default virtual matrix (routing level) for the Octaire is All (Audio-follow-Video). You have
the option of changing the factory default virtual matrix for your system. When you choose a new
default virtual matrix, the system will revert to that virtual matrix each time the system is powered up
even if you changed the virtual matrix using the V. Matrix list during normal operation. The power must
be cycled before the default virtual matrix changes are implemented. If you want to immediately switch
on the default matrix, either change the current virtual matrix (see page 48) or cycle the power.
The following example changes the default virtual matrix (routing level) from “All” to “Audio”.
To change the default virtual matrix (routing level):
1.
Press the Function Key.
The Function menu appears.
2. Locate Setup Options by scrolling with the Control Dial.
3. Press the Select Key.
The Setup Options submenu appears.
4. Scroll to Default VM.
Press the Select Key.
The Default VM list appears.
5. Scroll to Audio.
6. Press the Select Key.
The display returns to the top of the Setup Options submenu.
7. Cycle power to implement “Audio” as the default virtual matrix.
Or
Change the virtual matrix (see page 48) to immediately perform operations on the new default
virtual matrix without cycling power. (The next time power is cycled, “Audio” will be implemented
as the default virtual matrix.)
Current default virtual matrix