Instruction manual

Installation & Setup
21
Optima SD Instruction Manual
Linking an Optima SD System
Optima SD enclosures are directly linked to each other via their ENC LINK ports (FIG. 8). The total
distance between the two linked enclosures cannot exceed 100 ft. (30.5 m).
Cable Length Requirements
To link an Optima SD system:
1.
Insert one end of the crossover cable into the first enclosure’s ENC LINK (RJ-45) port.
2. Insert the other end of the crossover cable into the ENC LINK port on the second enclosure.
When power is applied, the ENC LINK port LEDs illuminate indicating communication status
(see page 20).
Network Segment Cable Type Maximum Distance
Between two Optima SD enclosures
RJ-45 crossover 100 ft. (30.5 m)
FIG. 8
Linking an Optima SD system
RJ-45 Crossover Cable
Max. 100 ft. (30.5 m)