Specifications

Button Labelling
29
Novara ControlPads & KeyPads
Verify that the vertical orientation of the Button Label is correct relative to the Novara keypad.
Align the Key Cap with the target pushbutton, and gently push the Key Cap down over the pushbutton.
Once seated properly on the pushbutton, the Key Cap will snap into place.
Re-Assembling the Keypad
Follow the steps in reverse to re-assemble the keypad. Take care of the following:
Be certain that the circuit boards are oriented correctly (see FIG. 33)
Be certain that both 4-pin connectors (between the two boards) are seated
properly.
Exploded View - 8-Button US Version
Exploded View - 8-Button UK/EU Version
FIG. 36 8- Button US
FIG. 37 8- Button UK/EU