Specifications

AMX Novara DCS1000 Device Configuration Software
36
Novara ControlPads & KeyPads
2. Select Button 1 in the System window (see FIG. 46 on page 34).
3. Click on Add Panel Feedback to invoke the Select Button Feedback window (FIG. 47 on page 34).
4. From the Select Action drop-down menu, select On/ Group Off, and click Group1 under Add To Group (as shown
in FIG. 51). Repeat for Buttons 2 to 4.
5. Select Button 5, click on Add Panel Feedback, select On/ Group Off, and click on Group 2 (FIG. 52).
Repeat for buttons 6 to 8.
6. To Save your program, select File > Save from the menu bar.
Testing Grouped Feedback
1.
Download the program to the ControlPad (see the Downloading the Program to the ControlPad section on
page 33).
2. Press Button 1 - the LED should illuminate.
3. Now press Button 2, this LED should illuminate, and extinguish Button 1.
Only the pressed button of 1 to 4 will stay illuminated.
Likewise only the pressed button of 5 to 8 will stay illuminated.
Delay Time
A delay time can be added in between events in a Script.
Delays can range from 0.5 seconds up to 24hours.
The delay is absolute and no other Event or Button press will be acknowledged until the time period has
elapsed.
Adding Delay Time to a Script (Example)
1.
Select a button, and add Flash feedback as Event 1 (FIG. 53).
FIG. 52 Button Feedback - Button 5, On / Group Off, Group 2
FIG. 53 Button 1 selected, "Flash" Button Feedback selected and added to Script as "Event 1"