Specifications

AMX Novara DCS1000 Device Configuration Software
52
Novara ControlPads & KeyPads
1. Choose a button to configure and select Button > Toggle. This invokes the Toggle window (FIG. 88):
2. Click on the Enable checkbox.
3. Select the number of toggle presses required for the button (2, 3, or 4).
4. Note that initially the Toggle window is set to configure the first press of the button. Program the script as normal
for the first button press.
5. Next select Program 2nd Press from the drop-down menu.
6. Program the script for the second press.
7. Continue for each required button press.
When the panel is configured, the button will toggle on each button press, then loop to 1st press.
Bank Assign
A button can be assigned to one of three banks X, Y, or Z. Each bank can have up to four different functions. This is
useful if you have a common set of functions.
For example. You could have a single 'Play' button controlling up to four different devices (e.g. DVD, VCR, CD, MP3
player, etc). To achieve this the button must be Bank Assigned.
1. Choose Button 1 to configure (in the System window), and select Button> Bank Assign. This invokes the Assign to
Bank window (FIG. 89):
2. Select Bank X. Bank X1 appears as default.
3. Write a script for Bank X1 (e.g. DVD play - FIG. 90).
4. Select X2 from the Assign To Bank drop-down menu and write a script (e.g. VCR play - FIG. 91).
FIG. 88 Toggle window
FIG. 89 Assign to Bank window
FIG. 90 Script for Bank X1 (DVD Play)