Specifications

Parameters, Variables and Commands Ver. 0002 A - 25
10. MONITORING GROUP “K”
KP1 F (F1112) DriveI2tErrorEffect
Function: It determines whether the i
2
t causes the motor to stop or it limits its current to the
nominal value.
Valid values: 0, Stops the system.
1, limits the current through the motor to its rated value.
Default value: 0 (Stops the system)
Version: Available from version 03.01 on.
KP2 O (F1113) ExtBallastResistance
Function: It contains the Ohm value of the External Ballast resistor of a Compact Drive. This is
useful for the i
2
t protection of that resistor.
Valid values: 0..6K5 (0 by default)
Version: Operative from version 03.07 on
KP3 O (F1114) ExtBallastPower
Function: It contains the value of the power of the External Ballast resistor of a Compact Drive.
This is useful for the i
2
t protection of that resistor.
Valid values: 0..65 kw (0 by default)
Version: Operative from version 03.07 on.
KP4 O (F1116) ExtBallastEnergyPulse
Function: It contains the value of the energy pulse that can be dissipated by the External Ballast
resistor of a Compact Drive. This is useful for the i
2
t protection of that resistor.
Valid values: 0..65 kWs (0 by default)
Version: Operative from version 03.07 on.
KV2 (F1100) DriveTemperature
KV4 W (F1101) DriveTmperatureErrorLimit
Function: Read / write of the limits set by the user for the warning and temperature error of the
Driver.
Valid values: 5..100 degrees centigrade (
o
C)
Version: Operative from version 02.01 on.
KV5 W (S201) MotorTemperatureWarningLimit
KV6 (S383) MotorTemperature
KV8 W (S204) MotorTemperatureErrorLimit
Function: Same for the motor. (KV6 is only applicable for AXM motors)
Valid values: 0..130 degrees centigrade (
o
C)
Version: Operative from version 02.01 on
KV9 W (S202) CoolingTemperatureWarningLimit
KV12 W (S205) CoolingTemperatureErrorLimit
Function: Same for the drive and its temperature
Valid values: 0..110 degrees centigrade (
o
C)
KV10 (F1102) CoolingTemperature
KV20 s (F1103) SupplyPlus5V
KV21 s (F1104) SupplyPlus8V
KV22 s (F1105) SupplyPlus18V
KV23 s (F1106) SupplyMinus5V
KV24 s (F1107) SupplyMinus8V
KV25 s (F1108) SupplyMinus18V
Function: Monitoring of heatsink temperature (degrees centigrade (
o
C)) and of power supply
voltages present at the module.
Version: Operative from version 02.01 on