Corporation Control System Accessories Operation/Reference Guide

Anterus™ RFID Solution

Anterus RFID Solution

ANT-RDR Product Specifications

The following table provides product specifications for the ANT-RDR Reader:

ANT-RDR Mounting/Installation

The ANT-RDR can be DIN-Rail mounted using the (optional) AC-DIN-EXTR DIN Rail Mounting

Bracket (FG532-05). Refer to the documentation included with the AC-DIN-EXTR DIN for mounting

instructions.

AXLink supports multiple topologies including Star, Daisy-Chain, or a combination of

both Star and Daisy-Chain.

ANT-RDR Specifications

Front Panel Components: • RF Status LED (red): Indicates reception from RFID tag.

• AXLINK Status LED (green): Blinks to indicate the device is installed and

communicating properly.

Solid ON = Power on, but no master connection.

Solid OFF = No power

• RF Stub Antenna (433.92 MHz)

Rear Panel Components: • AxLink connector - 4-pin 3.5 mm mini-Phoenix (male) connector provides data

and power to the ANT-RDR.

• DEVICE ID 8-position DIP Switch - Used to set the unique binary device

number. The device number is set by the total value of DIP switch positions

that are ON (down).

RF Specifications: • Transmission Frequency: 433.92 MHz

• Transmission Range: Up to 100 feet/30 meters (adjustable)

Note: Tag and Reader communication distances assume optimal orientation

between Tag and Reader. Read distances may also vary as a result of the pres-

ence of metal and environmental conditions.

System Limitations: • Up to 30 ANT-RDRs per system

• Up to 250 tags (ANT-TAG or ANT-BDG) per ANT-RDR

Power Requirements: • 780 mW; ±12 VDC, 90 mA (max.)

• Power provided by 4-pin AxLink connector.

Environmental: • Operational temperature: 32º F to 140º F (0º C to 60º C)

• Storage temperature: -4º F to 158º F (-20º C to 70º C)

• Humidity: 5% to 90% (non condensing)

Enclosure: Black Metal Powder coat

Dimensions (HWD): • .906 x 2.500 x 3.424 (23.01 mm x 63.50 mm x 86.96 mm)

• Does not include antenna.

Weight: 4 oz. (113.4 grams)

Certification: The following standards applied in accordance with Article 5 of the directive,

1999/5/EC:

• EN 300 220-1 V1.2.1 (1997-11)

• ETS 300 683 (1997-03)

Other AMX Equipment: • AC-DIN-EXTR DIN Rail Mounting Bracket (FG532-05)

Anterus products are designed to not interfere with WiFI and Zigbee frequency

spectrum used by other AMX products.