Specifications

AMX Novara DCS1000 Device Configuration Software
49
Novara ControlPads & KeyPads
Testing Grouped Feedback
1.
Download the program to the ControlPad (see the Downloading the Program to the ControlPad section
on page 46).
2. Press Button 1 - the LED should illuminate.
3. Now press Button 2, this LED should illuminate, and extinguish Button 1.
Only the pressed button of 1 to 4 will stay illuminated.
Likewise only the pressed button of 5 to 8 will stay illuminated.
Delay Time
A delay time can be added in between events in a Script.
Delays can range from 0.5 seconds up to 24hours.
The delay is absolute and no other Event or Button press will be acknowledged until the time period
has elapsed.
Adding Delay Time to a Script (Example)
1.
Select a button, and add Flash feedback as Event 1 (FIG. 26).
2. Click Add Time Delay to invoke the Set Time Delay window (FIG. 27).
3. Use the left/right arrow buttons to specify a time period.
Click the arrows on the Hours field to adjust hours up/down, in one-hour increments.
Click the arrows on the Minutes field to adjust minutes up/down, in one-minute increments.
Click the arrows on the Seconds field to adjust seconds up/down, in one-half second increments.
FIG. 26 Button 1 selected, "Flash" Button Feedback selected and added to Script as "Event 1"
FIG. 27 Set Time Delay window