User Guide

Using the DXP-HT Project Wizard

XP-HT v1.3 - Programmer’s Guide

System Information dialog

The first dialog in the Project Wizard is the System Information dialog (FIG. 1). This dialog

contains the information used by Design XPress - Home Theater (DXP-HT) to create and program

the control system.

Double-click on any device in the list to access the Device Configuration dialog, containing all

control information associated with the device.

The following list describes the items in the System Information dialog:

Note that since the Job Name, Created By and Company names are also used in the NetLinx

program, the characters that you are allowed to use are A-Z, a-z, 0-9, - and _. These fields are all

limited to 40 characters.

FIG. 1 System Information dialog

• Job Name: Enter the name of the project here. Each new project should be given a

unique Job Name and Description.

• Created By: This field is pre-populated, if this information was entered in the User Infor-

mation dialog. Otherwise, enter or edit the name of the project author here.

• Company: This field is also pre-populated, if this information was entered in the User

Information dialog. Otherwise, enter or edit the name of the company here.

• Description: Enter a description of the project here (8190 characters maximum). Any

alphanumeric character (including punctuation) can be used. Each new

project should be given a unique Job Name and Description.