User Guide

Using the DXP-HT Project Wizard

DXP-HT v1.3 - Programmer’s Guide

 The identifier entered into the Preset Name text box is the name that will be displayed on

the touch panel. No duplicates allowed (8 characters maximum).

 The Address field correspond to either the lighting controller address and the preset

number (as with AMX Radia), or the address of the keypad and the keypad button that

will be emulated (as with the LiteTouch controller).

For the AMX ALD-D48, the address is the 7-digit ID number of the ALD-D48 Device

Server.

For the AMX Radia the address is the AXlink address of the Radia MC.

The only valid keypad address characters are 0-9, A-F, and : (colon). For reference, here

are the formats for the various supported lighting systems:

Click the Apply button after editing a preset to apply the changes.

 The Button # refers to the button number or scene number the DXP-HT system is to

emulate when communicating to the lighting system.

For AMX Radia, the button # is the scene number to be recalled when this scene is

selected on the touch panel.

For Clipsal C-Bus and Dynalite systems (used primarily outside the U.S.), the button #

consists of the button number plus the fade rate, separated by a semi colon. For example:

 (C-Bus): K:P:[A4:E1]:75:8 indicates network $E1, group address $A4, go to 75%

at 8-second fade rate.

Lighting Controller Address Format DXP-HT Example

• AMX ALD-D48 The Address value is fixed at a value of one

and is disabled. This value corresponds to the

Device ID of the keypad.

1 (read-only)

• AMX Radia AXlink Device ID (1-255)The Address is the

AXlink device ID of the Radia MC.

• Clipsal C-Bus Group Address:Network Address (using a hex

value and a local network address)

A1:D4

• DynaLite DynaLite area (positive integer) 18

• Lehigh DX2 Lehigh area (1 - 16) 1

• Lutron GRAFIK Eye Master (positive integer) 17

• Lutron Homeworks

Interactive

Processor:Link:Keypad (positive integers) 1:4:9

• Lutron RadioRA Keypad Address (positive integer)

Note: keypad address 12 is reserved as the

RS-232 RadioRA interface. This interface is a

virtual keypad, and does not contain any but-

tons.

• LiteTouch 5000LC Keypad Address (3 nibble hex value A3E

• Tridonic DALI Tridonic group address (0 -15) 0

• Vantage Qlink Master:Keypad (positive integers) 1:5

For the AMX ALD-D48, the Address field value is fixed at a value of one (1) and is

read-only. This value corresponds to the Device ID of the keypad.