User's Manual

Programming The Mio R-2
10
Mio R-2
Download Mode
Pressing "3" on the remote toggles the Download mode OFF and ON. The Download mode must be
ON before you can download a file to the Mio R-2 device. While the Download mode is ON the
device will not go to sleep. A power cycle will return the device to Download OFF.
Debug Mode
Pressing button "4" on the remote toggles development mode between ON and OFF. The display
indicates the selected mode. In development mode, the display shows the IR code assigned to
buttons when pressed.
This mode is useful to the programmer when determining what IR codes are associated to each
mode.
Battery Type
Pressing button "6" on the remote toggles the battery type between Normal and Recharge. The
display indicates the selected type. The type of battery in the Mio R-2 dictates the battery type you
need to set.
LED Awake Brightness
Pressing button "7" on the remote toggles the Power LED brightness mode from LOW to MED and
then HIGH. The display indicates the selected mode.
LED Sleep Mode Brightness
Pressing button "8" on the remote toggles the Sleep brightness mode from OFF to LOW and then
MED. The Sleep brightness is the state the Mio R-2 assumes while in the charging cradle.