Corporation NXT/NXD-1200V Modero Video Touch Panel (G4) Quick Start Guide

ManualsBrandsAMX ManualsCar Video SystemModero Video Touch Panel (G4) NXT/NXD-1200V

Quick Start Guide

NXD & NXT-1200V

Modero Video Touch Panel (G4)

For more detailed installation, configuration, programming, file transfer, and

operating instructions, refer to the 1200V-Series Modero Touch Panels

Instruction Manual available on-line at www.amx.com.

ATTENTION!

Verify you are using the latest NetLinx Master and Modero touch panel firmware

(available from www.amx.com). Verify the TPDesign4 program being used is

Version 2.6 or higher.

Overview

The new 12" Modero Touch Panels (NXT/NXD-1200V) feature dual USB

connectivity for mouse and keyboard, as well as Composite/S-Video support.

The following is a listing of the currently available 1200V panels:

• NXD-1200V (FG2251-60K) - 12" Modero Video WallMount touch

panel Kit

• NXT-1200V (FG2250-60K) - 12" Modero Video Table Top touch

panel Kit

Specifications

Panel Connectors

FIG. 2 shows the connectors located on the 1200V Modero Video panels. The

Audio/Video RJ-45 connector provides differential audio/video signals between

the touch panel and the NXA-AVB/ETHERNET. This connector routes

Composite video, Stereo (left/right) audio, and microphone audio.

NXA-AVB/ETHERNET Breakout Box

FIG. 3 shows the front and rear connectors on the NXA-AVB/ETHERNET

breakout box. This breakout box can be mounted on either a horizontal flat

surface or in an equipment rack (by removing the front faceplate and securing it

to an (optional) AC-RK Rack Kit).

FIG. 1 Sample Wall Mount and Table Top 1200V Touch Panels

1200V Specifications

Dimensions (HWD): • NXD-1200V (with faceplate): 12.38" x 12.59" x 3.25"

(31.43 cm x 31.97 cm x 8.25 cm)

• NXT-1200V (Fully raised): 10.91" x 12.34" x 12.50"

(27.70 cm x 31.33 cm x 31.75 cm)

• NXT-1200V (Fully lowered): 6.77" x 12.34" x 12.50"

(17.20 cm x 31.33 cm x 31.75 cm)

• CB-TP12 (conduit/wallbox): 11.52" x 11.60" x 3.50"

(29.27 cm x 29.47 cm x 8.89 cm)

• MB-TP12 (VESA mounting box): 12.37" x 12.58" x 3.52"

(31.42 cm x 31.95 cm x 8.94 cm)

Power: • Constant current draw: 2.1 A @ 12 VDC (stand-alone)

• Startup current draw: 3.2 A @ 12 VDC (stand-alone)

Minimum power

supply required:

• PSN4.4 Power Supply (FG423-45)

- using accessories can increase the power draw requirements.

Memory: • 256 MB on-board memory

• 128 MB Compact Flash (upgradeable to 1 GB factory programmed)

Weight: • NXD-1200V: 10.80 lbs (4.90 kg)

• NXT-1200V: 10.80 lbs (4.90 kg)

LCD Parameters: • Aspect Ratio: 4:3

• Brightness (luminance): 250 cd/m2

• Channel transparency: 8-bit Alpha channel transparency

• Contrast ratio: 300:1

• Display area (HW): 183.10 mm x 247.40 mm

• Display colors: 256K (18-bit color depth)

• Dot/Pixel pitch: 0.297 mm

• Screen resolution (HV): 800 x 600 pixels

• Video formats: NTSC, PAL, and SECAM

(shown within variable-size video windows)

Viewing Angles: • Vertical: + 80° (up from center) and - 80° (down from center)

Supported Audio

Sample Rates:

• 48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz,

12000Hz, 11025Hz, and 8000Hz.

Certifications: • FCC Part 15 Class B, CE, and EN 60950

Front Panel

Components:

• Light Sensor: Photosensitive light detector for automatic adjustment of

the panel brightness

• Motion Sensor (PIR): Proximity Infrared Detector to wake the panel

when panel is approached

• Front Setup Access Button: Pushbutton (grey) used to either put the

panel into a "sleep" or "wake" state

• Microphone: Used for intercom applications

• Speakers: Stereo output with a frequency response of 450 Hz - 7 KHz

NXD-1200V

NXT-1200V

(Wall Mount)

(Table Top)

1200V Specifications (Cont.)

Rear Panel

Components:

• Audio/Video Connector: RJ-45 connector for communication of

differential audio/video signals

• Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps communication

• PWR Connector: 2-pin 3.5 mm mini-Phoenix connector

• Stereo Output Connector: Stereo output through a 3.5mm mini-jack

• USB Connector: Two Type A USB ports

• Mini-USB Connector: 5-pin Mini-USB connector

Operating /Storage

Environments:

• Operating Temperature: 10° C (50° F) to 40° C (104° F)

• Operating Humidity: 20% to 85% RH

• Storage Temperature: -20° C (-4° F) to 60° C (140° F)

• Storage Humidity: 5% to 85% RH

Included

Accessories:

• Installation Kit for 12" and 17" NXD panels (KA2251-01):

- 2-pin mini-Phoenix connector (41-5025)

- Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)

- One CAT5 Suppression Ferrites (04-0014)

- Four Drywall clips (62-5924-05) and #6 -metal strips (80-0192)

• Installation Kit for 12" NXT panels (KA2251-03):

- 2-pin mini-Phoenix connector (41-5025)

- Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)

- Two CAT5 Suppression Ferrites (04-0014)

• Modero Table Top Cable (CA2250-50)

- provided with all NXT Table Top panels.

• NXA-AVB/ETHERNET Breakout Box (FG2254-10)

Other AMX

Equipment:

• CB-TP12 Conduit/Wallbox (FG031-10)

• CC-USB (Type A) to Mini-B 5-Wire programming cable (FG10-5965)

• Kensington Lock Bracket (FG2259-10) (optional only with NXTs)

• MB-TP12 Universal VESA Mounting Box for NXD panels (FG031-50):

- Black metallic VESA back box (62-0031-50)

- Black plastic cover (with grommet opening) (60-0031-50)

- Strain relief grommet (45-0004-03)

- Four Phillips pan-head screws (#8-32 x 0.50 Black) (80-0146-02)

- Twelve Under-cut Phillips-head screws (#6-32 x 0.500 Black)

(80-0139)

• NXA-BASE/B (FG2255)

• NXA-PCI80211G Wireless Card (FG2255-04)

• NXA-RK12 Rackmount kit for 12" Wall Mount panels (FG2904-50)

• NXT-BP (FG2250-10)

• NXT-CHG (FG2250-50)

• PSN4.4 Power Supply (12 VDC) (FG423-45)

• PSN6.5 Power Supply (12 VDC) (FG423-41)

• Upgrade Compact Flash (factory programmed with firmware):

NXA-CFTPV256M - 256 MB V/VG compact flash card (FG2116-43)

NXA-CFTPV512M - 512 MB V/VG compact flash card (FG2116-44)

NXA-CFTPV1G - 1 GB V/VG compact flash card (FG2116-45)

FIG. 2 Connector layout on the 1200V Touch Panels

FIG. 3 Connector layouts on the NXA-AVB/ETHERNET Breakout Box

PWR

12VDC

ETHERNETAUDIO/VIDEO

PROGRAM

Stereo

Audio-Video from

Ethernet

Power

NXA-AVB/ETHERNET

(CAT5)

Keyboard/Mouse

USB connectors (2)

Mini-USB

(Program Port)

(CAT5)

Output

Power In

(front)

Ethernet (to panel)

Audio/Video

Power (to panel)

S-Video Chroma

Composite/

Mic Out

Audio

Ethernet In

S-Video

Luma

(rear)

(to panel)

Summary of content (2 pages)

PAGE 1
Quick Start Guide NXD & NXT-1200V For more detailed installation, configuration, programming, file transfer, and operating instructions, refer to the 1200V-Series Modero Touch Panels Instruction Manual available on-line at www.amx.com. 1200V Specifications (Cont.) Rear Panel Components: • Audio/Video Connector: RJ-45 connector for communication of differential audio/video signals • Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps communication • PWR Connector: 2-pin 3.
PAGE 2
Wiring the NXA-AVB/ETHERNET Connectors and Cables Wiring for Balanced Audio The inputs and outputs on the breakout box are separated into front and rear connectors. The rear connectors are used to input external signals. The front connectors are used to communicate signals between the NXA-AVB/ETHERNET and a target Modero panel. FIG. 4 provides a layout of the wiring connection both into and from the breakout box.