Car Video System User Manual

Introduction
2
MVP-5200i Modero Viewpoint Widescreen Touch Panel
The MVP-5200i comes with an integrated rear "kickstand", allowing it to be used and displayed away
from a Charging Station if necessary (FIG. 2). It also comes with a pre-installed 802.11g WPA/WPA2
SDIO wireless card.
FIG. 2 MVP-5200i side view (with kickstand)
MVP-5200i Specifications (FG5966-01, FG5966-02)
Dimensions: 4 3/4" x 7 9/16" x 13/16" (120.7 mm x 191.8 mm x 20.3 mm)
Weight: • Panel: 1.4 lbs (
0.64 kg)
Enclosure: MVP-5200i-GB: High-gloss black plastic with brushed metal retaining ring.
MVP-5200i-GW: High-gloss white plastic with brushed metal retaining ring.
Power Requirements
(Without Charging):
Panel with battery fully charged:
• Constant current draw: 0.3 A @ 12 VDC
• Startup current draw: 0.4 A @ 12 VDC
Power Requirements
(While Charging):
Panel while charging battery:
• Constant current draw: 1.1 A @ 12 VDC
• Startup current draw: 1.3 A @ 12 VDC
Minimum Power Supply
Required:
• PS3.0 Power Supply (FG423-30) - both 120 VAC and 240 VAC models are
shipped with this power supply
Power Modes: • AWAKE: All necessary modules are powered up and device remains online
with the Netlinx Master.
• ASLEEP: Only the backlight will be turned off after the user selectable time of
inactivity has elapsed. Panel resumes the ON mode in ~ 1 second.
• PROCESSOR SHUTDOWN: Power to all peripherals and components is
turned off. The system remains in this mode until either it is rebooted or the
battery is completely drained.
Certifications: • FCC Part 15 Class B and CE
•CE
• IEC60950
•RoHS
• TELEC
• Lithium polymer microbattery: UN/IATA
Battery Duration: • Four days of normal use (25% Awake state, 25% Asleep, and 50% Processor
Shutdown).
• Eight hours of continuous use (continuous Awake state).
Kickstand
Mini-USB port
DC power jack