Specifications
Table Of Contents
- MVP-5100/5150 Modero® ViewPoint® Touch Panels, 5.2" and 5”
- Introduction
- Accessories
- Configuring Communication
- Overview
- IR Communication
- Modero Setup and System Settings
- Wireless Settings - Wireless Access Overview (MVP-5150 Only)
- Configuring Wireless Network Access (MVP-5150 Only)
- Step 1: Configure the Device’s Wireless IP Settings (MVP- 5150 Only)
- Step 2: Configure the Card’s Wireless Security Settings
- Panel Downloads and Firmware Updates
- Setup Pages
- Protected Setup Pages
- Upgrading Firmware
- Programming
- Overview
- Page Commands
- Programming Numbers
- "^" Button Commands
- ^ANI
- ^APF
- ^BAT
- ^BAU
- ^BCB
- ^BCF
- ^BCT
- ^BDO
- ^BFB
- ^BIM
- ^BLN
- ^BMC
- ^BMF
- ^BMI
- ^BML
- ^BMP
- ^BNC
- ^BNN
- ^BNT
- ^BOP
- ^BOR
- ^BOS
- ^BPP
- ^BRD
- ^BSF
- ^BSM
- ^BSO
- ^BSP
- ^BVL
- ^BVN
- ^BVP
- ^BVT
- ^BWW
- ^CPF
- ^DLD
- ^DPF
- ^ENA
- ^FON
- ^GDI
- ^GIV
- ^GLH
- ^GLL
- ^GRD
- ^GRU
- ^GSC
- ^GSN
- ^ICO
- ^IRM
- ^JSB
- ^JSI
- ^JST
- ^MBT
- ^MDC
- ^SHO
- ^TEC
- ^TEF
- ^TOP
- ^TXT
- ^UNI
- Miscellaneous MVP Strings back to the Master
- MVP Panel Lock Passcode commands
- Text Effects Names
- Button Query Commands
- Panel Runtime Operations
- Input Commands
- Embedded codes
- Panel Setup Commands
- Battery Life and Replacement
- Appendix A: Text Formatting
- Appendix B: Wireless Technology
- Appendix C: Troubleshooting
- Overview
- Panel Doesn’t Respond To Touches
- Battery Will Not Hold Or Take A Charge
- MVP Isn’t Appearing In The Online Tree Tab
- MVP Can’t Obtain a DHCP Address
- My WEP Doesn’t Seem To Be Working
- NetLinx Studio Only Detects One Of My Connected Masters
- Can’t Connect To a NetLinx Master
- Only One Modero Panel In My System Shows Up
- Panel Behaves Strangely After Downloading A Panel File Or Firmware
- Overview

Battery Life and Replacement
149
MVP-5100/5150 5.2" Modero Viewpoint Touch Panels
Battery Life and Replacement
Overview
The MVP-5100 and MVP-5150 use a MVP-BP-5X Battery Pack Lithium-Polymer microbattery kit
(FG5966-27) for power away from a standard power source. The battery can be deep-charged up to 300
times before it loses the ability to retain more than 70 percent of its charge, at which time battery
replacement should be considered.
ATTENTION - READ THIS FIRST!
Lithium-Polymer batteries are small, compact, and ideal for providing long lasting power. However, they
must be used and charged properly. Improper use can result in serious injury, fire, or explosion.
Please read and understand the following warnings. If you have any questions or concerns with this
product, please contact your AMX sales representative.
To Avoid Injury, Never:
Use near open flame or other heat source
Puncture or disassemble battery
Damage external contacts
Dispose of battery in fire, water, or container with temperature above
100ºC (212ºF).
Always:
Use only with AMX approved battery charger
Store in dry place with temperature between 0° C (32° F) and 40° C (104° F)
This installation requires opening the case of the MVP-5100 or MVP-5150 and
working within its internal components. If you are unwilling or unable to replace the
battery, please return the device to AMX for battery replacement.
Misuse of a Lithium-Polymer battery may result in overheating, fire, or explosion!
Care must be taken to install the battery without damaging the battery.