Specifications
Table Of Contents
- MVP-5100/5150 Modero® ViewPoint® Touch Panels, 5.2" and 5”
- Introduction
- Accessories
- Configuring Communication
- Overview
- IR Communication
- Modero Setup and System Settings
- Wireless Settings - Wireless Access Overview (MVP-5150 Only)
- Configuring Wireless Network Access (MVP-5150 Only)
- Step 1: Configure the Device’s Wireless IP Settings (MVP- 5150 Only)
- Step 2: Configure the Card’s Wireless Security Settings
- Panel Downloads and Firmware Updates
- Setup Pages
- Protected Setup Pages
- Upgrading Firmware
- Programming
- Overview
- Page Commands
- Programming Numbers
- "^" Button Commands
- ^ANI
- ^APF
- ^BAT
- ^BAU
- ^BCB
- ^BCF
- ^BCT
- ^BDO
- ^BFB
- ^BIM
- ^BLN
- ^BMC
- ^BMF
- ^BMI
- ^BML
- ^BMP
- ^BNC
- ^BNN
- ^BNT
- ^BOP
- ^BOR
- ^BOS
- ^BPP
- ^BRD
- ^BSF
- ^BSM
- ^BSO
- ^BSP
- ^BVL
- ^BVN
- ^BVP
- ^BVT
- ^BWW
- ^CPF
- ^DLD
- ^DPF
- ^ENA
- ^FON
- ^GDI
- ^GIV
- ^GLH
- ^GLL
- ^GRD
- ^GRU
- ^GSC
- ^GSN
- ^ICO
- ^IRM
- ^JSB
- ^JSI
- ^JST
- ^MBT
- ^MDC
- ^SHO
- ^TEC
- ^TEF
- ^TOP
- ^TXT
- ^UNI
- Miscellaneous MVP Strings back to the Master
- MVP Panel Lock Passcode commands
- Text Effects Names
- Button Query Commands
- Panel Runtime Operations
- Input Commands
- Embedded codes
- Panel Setup Commands
- Battery Life and Replacement
- Appendix A: Text Formatting
- Appendix B: Wireless Technology
- Appendix C: Troubleshooting
- Overview
- Panel Doesn’t Respond To Touches
- Battery Will Not Hold Or Take A Charge
- MVP Isn’t Appearing In The Online Tree Tab
- MVP Can’t Obtain a DHCP Address
- My WEP Doesn’t Seem To Be Working
- NetLinx Studio Only Detects One Of My Connected Masters
- Can’t Connect To a NetLinx Master
- Only One Modero Panel In My System Shows Up
- Panel Behaves Strangely After Downloading A Panel File Or Firmware
- Overview
Battery Life and Replacement
151
MVP-5100/5150 5.2" Modero Viewpoint Touch Panels
Specifications
READ THESE INSTRUCTIONS FIRST!
To minimize the risk of damage to the battery during installation, all replacement MVP-BP-51 batteries
come in a protective metal cover.
Replacing The Battery
To remove an old battery and replace it:
1. Remove the battery from its packaging and inspect it for any damage or distortion. If the battery
shows evidence of damage, contact AMX for replacement and proper disposal information.
2. Place the device face-down on a surface that will not scratch the unit and remove the five screws
from the back of the device (FIG. 84).
MVP-BP-5X Battery Pack Kit (FG5966-27) Specifications
Dimensions: 4 1/8” x 2 1/2” x 3/8” (10.48 cm x 6.35 cm x 0.95 cm)
Weight: 0.35 lbs (158.76 g)
Certifications: • CE (pending)
• IEC/EN-60950
•RoHS
• UN/IATA
• UL (pending)
Operating/
Storage
Environment
• Operating Temperature: 0° C (32° F) to 45° C (113° F)
• Operating Humidity: 20% - 85% RH
• Storage Temperature: -20° C (-4° F) to 60° C (140° F) for periods of less than one
month, -20° C (-4° F) to 45° C (113° F) for less than three months but greater than one
month, and -20° C (-4° F) to 20° C (68° F) for less than one year but greater than three
months
• Storage Humidity: 5% - 85% RH
Included Parts • Replacement MVP-5100/5150 battery (57-0016-SA)
• Upper rubber feet (screw covers, black, 60-5966-13BL)
• Large rubber foot with adhesive, (60-5966-44)
• Upper screws (5), (80-0125-01)
• Replacement battery cover screws (2), (80-0108-05)
IMPORTANT: Do NOT discharge the battery before installing the latest MVP-5100/
5150 firmware (v2.66.17 or later), available at www.amx.com. Prior to battery
removal, run the device until the battery is completely discharged.