Operation/Reference Guide MVP-TDS Table Docking Station for MVP-7500/8400 Modero® ViewPoint® Wireless Touch Panels Touch Panels & Accessories Last Revised: 5/19/2009
AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX, with the following exceptions: • Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components that are warranted for a period of one (1) year.
FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
Table of Contents Table of Contents MVP-TDS Table Top Docking Station .................................................................1 Overview .................................................................................................................. 1 Specifications ................................................................................................................. 1 MVP-TDS docking station connectors .............................................................................
Table of Contents ii MVP-TDS Table Docking Station for MVP Panels
MVP-TDS Table Top Docking Station MVP-TDS Table Top Docking Station Overview The MVP-TDS Table Top Docking Station (FG5965-10) extends the functionality of the MVP panels when resting on a flat surface. The MVP-TDS recharges the panel’s batteries while maintaining continuous control of integrated technology (FIG. 1). The MVP-TDS utilizes an locking mechanism that allows you to adjust the vertical viewing angle, and uses an electromagnet to secure the panel.
MVP-TDS Table Top Docking Station MVP-TDS Specifications (Cont.) Power Requirements: • Stand-alone with no batteries: 0.1 A @ 12 VDC • Stand-alone charging two batteries: 2.1 A @ 12 VDC • With no batteries and charging a connected MVP panel’s two internal batteries: 3.3 A @ 12 VDC • With two batteries and charging a connected MVP panel’s two internal batteries: 3.3 A @ 12 VDC Weight: • Stand-alone: 3.38 lbs (1.53 kg) • With two batteries: 4.18 lbs (1.
MVP-TDS Table Top Docking Station MVP-TDS LED Indicators The two LED indicators indicate the battery and communication status: LED Pattern Indicators for the MVP-TDS LED Left - Battery Status TDS only Right - Comm.
MVP-TDS Table Top Docking Station Once MVP batteries are fully charged, the MVP-TDS begins charging MVP-BP batteries inserted within its rear battery compartments. Initially, both blue LEDs illuminate and remain dim (indicating that the power is being supplied to the MVP-TDS). Connecting a USB Keyboard and Mouse to the MVP-TDS The MVP-TDS can have two USB input devices (keyboard and mouse) connected for use on the MVP panel’s different firmware and TPD4 panel pages.
MVP-TDS Table Top Docking Station Securing an MVP Panel to an MVP-TDS The MVP will not be able to communicate with or receive power from the MVP-TDS without a proper connection. 1. Place the MVP-TDS on a flat and level surface. 2. Provide power to the MVP-TDS (refer to the Powering the MVP-TDS section on page 3). 3. Place the MVP on the support cradle so that the alignment pins on the TDS fit into the matching holes on the bottom of the MVP. 4.
MVP-TDS Table Top Docking Station Removing an MVP Panel from an MVP-TDS The MVP security feature requires the entry of a security code (password) entered via an on-screen keypad. This password is entered within the MVP’s Password Setup page. Refer to the MVP-7500/8400 Operation/Reference Guide (available online at www.amx.com) for more information on setting up a User Access username and password. Unsecured MVP removal from an MVP-TDS 1. Press and hold the security release pushbutton.
MVP-TDS Table Top Docking Station Installing an MVP-BP Battery into an MVP-TDS The MVP-TDS connects directly to a PSN4.4 power supply and provides both power and communication to docked MVP panel. The MVP-TDS can charge batteries in its own battery compartments, as well as those within the MVP panel. 1. Raise the rear connector cover to expose the battery compartments and connectors. 2.
MVP-TDS Table Top Docking Station 8 MVP-TDS Table Docking Station for MVP Panels
Upgrading the Docking Station Firmware Upgrading the Docking Station Firmware The following accessory devices are firmware upgradeable: MVP-TDS Table Top Docking Station (FG5965-10) MVP-WDS Wall/Flush Mount Docking Station - Black (FG5965-11) MVP-WDS Wall/Flush Mount Docking Station - Silver (FG5965-21) This device is not given a unique device number which would ordinarily appear within the Online Tree tab of NetLinx Studio.
Upgrading the Docking Station Firmware Displays the current docking station firmware version FIG. 2 Batteries page The docking station firmware is shown on the right of the Batteries page. Verify you have downloaded the latest firmware file from www.amx.com and then save the Kit file to your computer. Step 2: Upgrade the Docking Station firmware via USB 1. Configure the panel for a USB Connection Type. 2. Prepare NetLinx Studio for communication to the panel via a Virtual Master.
Upgrading the Docking Station Firmware Selected Docking Station Firmware file Description field for selected Kit file Firmware download status Device and System values must match the System and Device values listed in the Project Navigator window FIG. 3 Send to NetLinx Device dialog (showing docking station firmware update via USB) Firmware upgrades can not be done directly to the docking station but must be routed through the MVP panel. 10. Click the Reboot Device checkbox.
Upgrading the Docking Station Firmware Although firmware upgrades can be done over wireless Ethernet; it is recommended that firmware KIT files be transferred over a direct USB connection and only when the panel is connected to a power supply. If battery power or wireless connection fails during a firmware upgrade, the panel flash file system may become corrupted.
MVP-TDS Table Docking Station MVP-TDS Table Docking Station for MVP Panels 13
AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without notice at any time. ©2009 5/09 It’s Your World - Take Control™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.222.0193 • 469.624.8000 • 469-624-7153 fax • 800.932.6993 technical support • www.amx.
