Instruction Manual Modero X-Series G5 Touch Panels MXT/D-2001-PAN - 20.3" Modero X Series G5 Panoramic Touch Panels MXT/D-1901-PAN - 19.4" Modero X Series G5 Panoramic Touch Panels MXT/D-1001-PAN - 10.
AMX Limited Warranty and Disclaimer This Limited Warranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Partner which include AMX Dealers, Distributors, VIP’s or other AMX authorized entity.
Table of Contents Table of Contents Modero X Series G5 Touch Panels ......................................................................1 Overview .................................................................................................................. 1 Sleep Button ............................................................................................................. 2 Powering On/Off X Series G5 Panels ..............................................................................
Table of Contents Wiring a 12VDC Power Connection .......................................................................................... 30 Power via PoE ............................................................................................................... 31 Ethernet Cable Installation and Modification............................................................................ 31 Installing Wall-Mount (MXD) Panels ..................................................................
Table of Contents Appendix: Troubleshooting ..............................................................................67 Overview ................................................................................................................ 67 Panel Doesn’t Respond To Touches .............................................................................. 67 Panel Isn’t Appearing In The Online Tree Tab ...............................................................
Table of Contents iv Modero X® Series G5 Touch Panels Instruction Manual
Modero X Series G5 Touch Panels Modero X Series G5 Touch Panels Overview The most elegant interface designed specifically for dedicated room control has been significantly enhanced to include a new G5 Graphic Engine to provide even faster and smoother animations and transitions, and we quadrupled the processing power with a new Quad Core Processor. This new generation of touch panels is built for usability offering edge-to-edge capacitive touch glass with multi-touch capabilities.
Modero X Series G5 Touch Panels Sleep Button X Series G5 touch panels are operated using its integral touchscreen, as well as the Sleep button. The Sleep button is located in the in the center of the top panel of the device for tabletop and landscape wall-mount panels; it is located in the center of the left panel for portrait panels (see FIG. 2 on page 2). Sleep button (on top panel) Sleep button (on top panel) Sleep button (on left panel) FIG.
Modero X Series G5 Touch Panels Programming the Modero X Series G5 touch panels require the use of the latest versions of NetLinx Studio and TPDesign5, both available to download at www.amx.com. Bluetooth Support X Series G5 touch panels allow the use of Bluetooth keyboard and mouse combinations, using HID Profile v1.1. Using a keyboard and mouse with the device requires use of the MXA-BT Bluetooth USB Adapter (FG5968-19).
Modero X Series G5 Touch Panels Active Video Windows - Limitations The following limitations apply to the display of active video windows on X Series G5 panels: The term "Active Video Windows" refers to any "window" on the touch panel (which could be a Page, Popup, Sub-Page or Button) that is displaying active video content. Maximum supported number of active video windows displayed simultaneously on the panel: 2 While this limitation is not enforced (i.
MXT/D-2001-PAN - 20.3" X Series G5 Panels MXT/D-2001-PAN - 20.3" X Series G5 Panels MXT-2001-PAN (Tabletop) NFC Sensor Sleep Button USB Ports (2) Cable Slot FIG. 6 MXT-2001-PAN touch panel MXT-2001-PAN Specifications MXT-2001-PAN Specifications DIMENSIONS (HWD) 9 3/16" x 20 3/8" x 5 7/8" (235 mm x 519 mm x 150 mm) WEIGHT 12.3 lbs (5.58 Kg) POWER CONSUMPTION • Full-On: 35 W (12 VDC, 2.9 A) • Standby: 7 W (12 VDC, 0.
MXT/D-2001-PAN - 20.3" X Series G5 Panels MXT-2001-PAN Specifications (Cont.) MEMORY • SDRAM: 2 GB • Flash: 16 GB • Maximum Project Size: 12 GB flash, available for apps and touch panel files COMMUNICATIONS • Ethernet: 10/100 port, RJ-45 connector. Supported IP and IP-based protocols: UCP, TCP, ICMP, ICSP, IGMP, DHCP, FTP, DNS, RFB (for VNC), HTTP • USB: (3) USB host 2.
MXT/D-2001-PAN - 20.3" X Series G5 Panels MXT-2001-PAN Specifications (Cont.) ENVIRONMENTAL • • • • • Temperature (Operating): 32° F to 104° F (0° C to 40° C) Temperature (Storage): 4° F to 140° F (-20° C to 60° C) Humidity (Operating): 20% to 85% RH Humidity (Storage): 5% to 85% RH Power ("Heat") Dissipation: On: 119.4 BTU/hr Standby: 23.
MXT/D-2001-PAN - 20.3" X Series G5 Panels MXD-2001-PAN Specifications MXD-2001-PAN Specifications DIMENSIONS (HWD) • Landscape: 9 1/2" x 20 3/8" x 11/16" (242 mm x 519 mm x 19 mm) • Portrait: 20 3/8" x 9 1/2" x 11/16" (519 mm x 242 mm x 19 mm WEIGHT 9.0 lbs (4.08 Kg) POWER CONSUMPTION • Full-On: 35 W (12 VDC, 2.9 A) • Standby: 7 W (12 VDC, 0.6 A) EXTERNAL POWER SUPPLY REQUIRED Requires one of these AMX power sources (not included): • • • • PSN4.4 Power Supply, 4.4 A, 3.5 mm Phoenix, 13.
MXT/D-2001-PAN - 20.3" X Series G5 Panels MXD-2001-PAN Specifications (Cont.) VIDEO • Supported Video Codecs: MPEG-2-TS: MPEG-2 Main Profile@High Level up to 720p at 25 fps (decode only) MPEG-2-TS: H.264 High Profile@Layer 4, AAC-LC up to 720p at 25 fps (encode/ decode) MJPEG up to 720p at 25 fps (decode only) • Supported Video Transport Streams: MPEG-TS for MPEG2 and H.
MXT/D-2001-PAN - 20.3" X Series G5 Panels MXD-2001-PAN Specifications (Cont.) OPTIONAL ACCESSORIES • MXA-RMK-20 Modero X Series Rack Mount Kit (FG5969-60) • MXA-FMK-20 Flush Mount Kit for 20.3" Modero X Series Wall Mount Touch Panels (FG5968-68) • MXA-MP, Modero X/S Series Multi Preview (FG5968-20) • MXA-MPL Modero X/S Series Multi Preview Live (FG5968-10) • PSR4.4, Power Supply, 4.4 A, 3.5 mm Phoenix with Retention Screws (FG423-46) • PSN4.4, Power Supply, 4.4 A, 3.5 mm Phoenix, 13.
MXT/D-1901-PAN - 19.4" X Series G5 Panels MXT/D-1901-PAN - 19.4" X Series G5 Panels MXT-1901-PAN (Tabletop) NFC Sensor Sleep Button USB Ports (2) Cable Slot FIG. 8 MXT-1901-PAN touch panel MXT-1901-PAN Specifications MXT-1901-PAN Specifications DIMENSIONS (HWD) 7" x 20 3/8" x 5 5/16" (177 mm x 519 mm x 135 mm) WEIGHT 9.5 lbs (4.31 Kg) POWER CONSUMPTION • Full-On: 35 W (12 VDC, 2.9 A) • Standby: 7 W (12 VDC, 0.
MXT/D-1901-PAN - 19.4" X Series G5 Panels MXT-1901-PAN Specifications (Cont.) VIEWING ANGLE • Vertical: ± 89° • Horizontal: ± 89° MEMORY • SDRAM: 2 GB • Flash: 16 GB • Maximum Project Size: 12 GB flash, available for apps and touch panel files COMMUNICATIONS • Ethernet: 10/100 port, RJ-45 connector. Supported IP and IP-based protocols: UCP, TCP, ICMP, ICSP, IGMP, DHCP, Telnet, FTP, DNS, RFB (for VNC), HTTP • USB: (3) USB host 2.
MXT/D-1901-PAN - 19.4" X Series G5 Panels MXT-1901-PAN Specifications (Cont.) ENVIRONMENTAL • • • • • Temperature (Operating): 32° F to 104° F (0° C to 40° C) Temperature (Storage): 4° F to 140° F (-20° C to 60° C) Humidity (Operating): 20% to 85% RH Humidity (Storage): 5% to 85% RH Power ("Heat") Dissipation: On: 119.4 BTU/hr Standby: 23.
MXT/D-1901-PAN - 19.4" X Series G5 Panels MXD-1901-PAN Specifications MXD-1901-PAN Specifications DIMENSIONS (HWD) • Landscape: 6 7/8" x 20 3/8" x 11/16" (175 mm x 519 mm x 19 mm) • Portrait: 20 3/8" x 6 7/8" x 11/16" (519 mm x 175 mm x 19 mm) WEIGHT 6.9 lbs (3.13 Kg) POWER CONSUMPTION • Full-On: 35 W (12 VDC, 2.9 A) • Standby: 7 W (12 VDC, 0.6 A) EXTERNAL POWER SUPPLY REQUIRED Requires one of these AMX power sources (not included): • • • • PSN4.4 Power Supply, 4.4 A, 3.5 mm Phoenix, 13.
MXT/D-1901-PAN - 19.4" X Series G5 Panels MXD-1901-PAN Specifications (Cont.) VIDEO • Supported Video Codecs: MPEG-2-TS: MPEG-2 Main Profile@High Level up to 720p at 25 fps (decode only) MPEG-2-TS: H.264 High Profile@Layer 4, AAC-LC up to 720p at 25 fps (encode/decode) MJPEG up to 720p at 25 fps (decode only) • Supported Video Transport Streams: MPEG-TS for MPEG2 and H.
MXT/D-1901-PAN - 19.4" X Series G5 Panels MXD-1901-PAN Specifications (Cont.) OPTIONAL ACCESSORIES • • • • • • • • MXA-FMK-19 Flush Mount Kit, 19.4" Modero X Wall Mount (FG5968-69) MXA-RMK-19 Modero X Series Rack Mount Kit (FG5969-61) MXA-MP, Modero X/S Series Multi Preview (FG5968-20) MXA-MPL, Modero X/S Series Multi Preview Live (FG5968-10) PSR4.4, Power Supply, 4.4 A, 3.5 mm Phoenix with Retention Screws (FG423-46) PSN4.4, Power Supply, 4.4 A, 3.5 mm Phoenix, 13.
MXT/D-1001 - 10.1" X Series G5 Panels MXT/D-1001 - 10.1" X Series G5 Panels MXT-1001 (Tabletop) NFC Sensor Sleep Button USB Ports (2) FIG. 10 MXT-1001 Touch Panel MXT-1001 Specifications MXT-1001 Specifications DIMENSIONS (HWD) 6 7/8" x 9 7/8" x 4 7/8" (174 mm x 252 mm x 124 mm) WEIGHT 3.1 lbs (1.41 Kg) POWER CONSUMPTION • • • • EXTERNAL POWER SUPPLY REQUIRED Optimal performance requires use of one of the following AMX PoE power supplies (not included): Full-On: 12.95 W maximum Standby: 5.
MXT/D-1001 - 10.1" X Series G5 Panels MXT-1001 Specifications (Cont.) VIEWING ANGLE • Vertical: ± 89° • Horizontal: ± 89° MEMORY • SDRAM: 2 GB • Flash: 16 GB • Maximum Project Size: 12 GB flash, available for apps and touch panel files COMMUNICATIONS • Ethernet: 10/100 Auto MDI-X port, RJ-45 connector. Supported IP and IP-based protocols: UCP, TCP, ICMP, ICSP, IGMP, DHCP, FTP, DNS, RFB (for VNC), HTTP • USB: (2) USB host 2.
MXT/D-1001 - 10.1" X Series G5 Panels MXT-1001 Specifications (Cont.) ENVIRONMENTAL • • • • • Temperature (Operating): 32° F to 104° F (0° C to 40° C) Temperature (Storage): 4° F to 140° F (-20° C to 60° C) Humidity (Operating): 20% to 85% RH Humidity (Storage): 5% to 85% RH Power ("Heat") Dissipation: On: 44.2 BTU/hr Standby: 19.
MXT/D-1001 - 10.1" X Series G5 Panels MXD-1001 Specifications MXD-1001 Specifications DIMENSIONS (HWD) • Landscape: 6 11/16" x 9 7/8" x 2 5/8" (171 mm x 252 mm x 67 mm) • Portrait: 9 7/8" x 6 11/16" x 2 5/8" (252 mm x 171 mm x 67 mm) WEIGHT 2.0 lbs (0.91 Kg) POWER CONSUMPTION • • • • EXTERNAL POWER SUPPLY REQUIRED Optimal performance requires use of one of the following AMX PoE power supplies (not included): Full-On: 12.95 W maximum Standby: 5.
MXT/D-1001 - 10.1" X Series G5 Panels MXD-1001 Specifications (Cont.) VIDEO • Supported Video Codecs: MPEG-2-TS: MPEG-2 Main Profile@High Level up to 720p at 25 fps (decode only) MPEG-2-TS: H.264 High Profile@Layer 4, AAC-LC up to 720p at 25 fps (encode/decode) MJPEG up to 720p at 25 fps (decode only) • Supported Video Transport Streams: MPEG-TS for MPEG2 and H.
MXT/D-1001 - 10.1" X Series G5 Panels MXD-1001 Specifications (Cont.) OPTIONAL ACCESSORIES • • • • • • • • • • • • MXA-FMK-10, Flush Mount Kit, 10" Modero X Wall Mount (FG5969-62) MXA-RMK-10, Modero X Series Rack Mount Kit (FG5969-62) MXA-MP, Modero X/S Series Multi Preview (FG5968-20) MXA-MPL, Modero X/S Series Multi Preview Live (FG5968-10) PS-POE-AF-TC, PoE Injector, 802.
MXT/D-701 - 7" X Series G5 Panels MXT/D-701 - 7" X Series G5 Panels MXT-701 (Tabletop) NFC Sensor Sleep Button USB Ports (2) FIG. 12 MXT-701 touch panel MXT-701 Specifications MXT-701 Specifications DIMENSIONS (HWD) 5" x 7 5/16" x 4 1/8" (126 mm x 187 mm x 105 mm) WEIGHT 1.9 lbs (0.86 Kg) POWER CONSUMPTION • • • • EXTERNAL POWER SUPPLY REQUIRED: Optimal performance requires use of one of the following AMX PoE power supplies (not included): Full-On: 11.5 W maximum Standby: 5.
MXT/D-701 - 7" X Series G5 Panels MXT-701 Specifications (Cont.) VIEWING ANGLE • Vertical: ± 89° • Horizontal: ± 89° MEMORY • SDRAM: 2 MB • Flash: 16 GB • Maximum Project Size: 12 GB flash, available for apps and touch panel files COMMUNICATIONS • Ethernet: 10/100 port, RJ-45 connector. Supported IP and IP-based protocols: UCP, TCP, ICMP, ICSP, IGMP, DHCP, FTP, DNS, RFB (for VNC), HTTP • USB: (2) USB host 2.
MXT/D-701 - 7" X Series G5 Panels MXT-701 Specifications (Cont.) INCLUDED ACCESSORIES • MXA-USB-C, USB Port Cover Kit, Modero X/S Series Touch Panel (FG5968-18) • 3/4" Mini-Grommet (FG570-01) • MXA-CLK, Modero X/S Series Cleaning Kit (FG5968-16) OPTIONAL ACCESSORIES MXA-MP, Modero X/S Series Multi Preview (FG5968-20) MXA-MPL, Modero X/S Series Multi Preview Live (FG5968-10) PS-POE-AF-TC, PoE Injector, 802.
MXT/D-701 - 7" X Series G5 Panels MXD-701 Specifications MXD-701 Specifications DIMENSIONS (HWD) • Landscape: 4 13/16" x 7 5/16" x 2 1/2" (122 mm x 186 mm x 63 mm) • Portrait: 7 5/16" x 4 13/16" x 2 1/2" (186 mm x 122 mm x 63 mm) WEIGHT 1.4 lbs (0.64 Kg) POWER CONSUMPTION • • • • EXTERNAL POWER SUPPLY REQUIRED Optimal performance requires use of one of the following AMX PoE power supplies (not included): Full-On: 11.5 W maximum Standby: 5.
MXT/D-701 - 7" X Series G5 Panels MXD-701 Specifications (Cont.) VIDEO • Supported Video Codecs: MPEG2-TS: MPEG-2 Main Profile@High Level up to 720p at 25 fps (decode only) MPEG-2-TS: H.264 High Profile@Layer 4, AAC-LC up to 720p at 25 fps (decode) MJPEG up to 720p at 25 fps (decode only) • Supported Video Transport Streams: MPEG-TS for MPEG2 and H.
MXT/D-701 - 7" X Series G5 Panels MXD-701 Specifications (Cont.) OPTIONAL ACCESSORIES • • • • • • • • • • • • • MXA-FMK-07 Flush Mount Kit, 7" Modero X Wall Mount (FG5968-71) MXA-RMK-07 Modero X Series Rack Mount Kit (FG5969-63) MXA-MP, Modero X/S Series Multi Preview (FG5968-20) MXA-MPL, Modero X/S Series Multi Preview Live (FG5968-10) PS-POE-AF-TC, PoE Injector, 802.
Installing Tabletop (MXT) Panels Installing Tabletop (MXT) Panels MXT-2001-PAN / MXT-1901-PAN Detailed specifications drawings for the MXT-2001-PAN and MXT-1901-PAN are available to download from www.amx.com. Connector Locations - MXT-2001-PAN / MXT-1901-PAN Two Type A USB ports are located on the rear right corner of the panel (FIG. 14). USB peripherals (i.e. mouse, keyboard) may be connected to either of the two USB ports on the rear of the device.
Installing Tabletop (MXT) Panels MXT-1001 / MXT-701 Detailed specifications drawings for the MXT-1001 and MXT-701 are available to download from www.amx.com. Connector Locations - MXT-1001/MXT-701 Two Type A USB ports are located on the rear right corner of the panel (FIG. 17). USB peripherals (i.e. mouse, keyboard) may be connected to either of the two USB ports on the rear of the device.
Installing Tabletop (MXT) Panels Do not tighten the screws excessively; doing so may strip the threads and damage the connector. 3. Verify the connection of the 2-pin 3.5 mm captive wire to the external 12 VDC-compliant power supply and apply power. Power via PoE Power for the MXT-1001 and MXT-701 is supplied via PoE (Power Over Ethernet ), utilizing an AMX-certified, capacitive touch-compliant PoE injector such as the PS-POE-AT High Power PoE Injector (FG423-81) or other approved AMX PoE power source.
Installing Tabletop (MXT) Panels 32 Modero X® Series G5 Touch Panels Instruction Manual
Installing Wall-Mount (MXD) Panels Installing Wall-Mount (MXD) Panels A Note About Wall and Rack Installation AMX DEVICE Some products are installed in areas of differing temperature and cooling methodologies. These include products installed in walls, racks, cabinets, etc. Those areas may have different temperatures and/or cooling approaches that must be taken into consideration to maintain the product within the specified operating temperature. FIG.
Installing Wall-Mount (MXD) Panels Installation Recommendations During any installation, a lack of ventilation may produce conditions that may adversely affect the device’s operation. In these circumstances, special care must be made to make sure that temperatures within enclosed areas do not exceed the device’s maximum rated temperature.
Installing Wall-Mount (MXD) Panels These locking tabs are only extended AFTER the Backbox is inserted into the wall. The Backbox also has four slots for accepting the temporary mounting posts on the back of the device. When installing the Backbox, make sure that the assembly is in the correct position and in the correct place. Once the locking tabs are extended and locked into place, removing the Backbox may be difficult without having access to the back of the wall or causing damage to the wall.
Installing Wall-Mount (MXD) Panels MXD-1901-PAN Dimensions FIG. 25 provides dimensions for the MXD-1901-PAN: Notes: Dimensions in parenthesis are in millimeters Additional detailed installation and product drawings are available to view/download at www.amx.com FIG. 25 MXD-1901-PAN - Dimensions In order to ensure a stable installation, the thickness of the wall material must be a minimum of .50 inches (1.27cm) and a maximum of .875 inches (2.22cm).
Installing Wall-Mount (MXD) Panels Installing the Backbox MXD-2001-PAN Installation Dimensions FIG. 26 and FIG. 27 provide installation dimensions for the MXD-2001-PAN: FIG. 26 MXD-2001-PAN-L Installation Dimensions (front view) Notes: - Dimensions in parenthesis are in millimeters. - These drawings show a Landscape panel. The dimensions are the same for Portrait panels, except for the vertical orientation.
Installing Wall-Mount (MXD) Panels MXD-1901-PAN Installation Dimensions FIG. 28 and FIG. 29 provide installation dimensions for the MXD-1901-PAN: FIG. 28 MXD-1901-PAN-L Installation Dimensions (front view) Notes: - Dimensions in parenthesis are in millimeters. - These drawings show a Landscape panel. The dimensions are the same for Portrait panels, except for the vertical orientation.
Installing Wall-Mount (MXD) Panels 3. Thread the incoming power and Ethernet wiring from their terminal locations through the surface opening (FIG. 30). Note that FIG. 30 shows the MXD-1901-PAN, but the illustration applies equally to the MXD-2001-PAN. Also note that FIG. 30 shows a landscape panel but the installation of a portrait panel is essentially the same, other than the vertical orientation. Leave enough slack in the wiring to accommodate any re-positioning of the panel.
Installing Wall-Mount (MXD) Panels The Backbox is clear to allow visual confirmation that the tabs have been extended and are gripping the wall, as well as in assisting with removal if necessary. For additional strength, #4 mounting screws (not included) may be secured through circular holes located at the left and right sides of the MXD-2001-PAN (see FIG. 30). In order to prevent damage to the touch panel, make sure that these are flush with the Backbox. 7.
Installing Wall-Mount (MXD) Panels Side cover 4X Mounting post openings Side cover 4X Mounting posts 6X 4-40 X 1/4" LONG FLAT HEAD TORQUE TO 5±.2 IN LBS Note: Additional detailed installation and product drawings are available to view/download at www.amx.com FIG. 32 MXD-1901-PAN installation (Landscape) When installing the panel, do NOT press on or near the center of the panel. Too much stress at the center may damage the touch screen surface.
Installing Wall-Mount (MXD) Panels Wiring a 12VDC Power Connection To use the 2-pin 3.5 mm captive wire connector with a 12 VDC-compliant power supply, the incoming PWR and GND wires from the external source must be connected to their corresponding locations on the connector (FIG. 33). The connector uses locking screws to insure a connection to the device, so make sure to insert and tighten the screws before applying power. PWR + Power Supply GND To the Touch Panel FIG.
Installing Wall-Mount (MXD) Panels 6. When the first side is free, repeat the process with the other. 7. With the edge of the touch panel free, carefully lift up and out (Landscape) or to the left and out (Portrait) to remove the touch panel from the Backbox. Be careful not to pull on the cables or connectors. 8. To reattach the panel to its Backbox, repeat the installation procedure. For further information, refer to the video available at www.amx.com (go to Newsroom > Videos > Touch Panels).
Installing Wall-Mount (MXD) Panels Installing the MXD-1001 / MXD-701 Into a Wall The Backbox has locking tabs to lock the Backbox to the wall - there are four on the MXD-1001 and two on the MXD-701 (FIG. 36). Locking tabs (X4) Backbox knockouts (X4) Backbox knockouts (X4) Locking tabs (X2) Backbox Backbox MXD-701 MXD-1001 FIG. 36 MXD-1001 and MXD-701 (Landscape) These locking tabs are only extended AFTER the Backbox is inserted into the wall. (FIG. 23 and FIG. 24).
Installing Wall-Mount (MXD) Panels MXD-1001 Dimensions FIG. 37 provides dimensions for the MXD-1001: Notes: Dimensions in parenthesis are in millimeters Additional detailed installation and product drawings are available to view/download at www.amx.com FIG.
Installing Wall-Mount (MXD) Panels MXD-701 Dimensions FIG. 37 provides dimensions for the MXD-701: Notes: Dimensions in parenthesis are in millimeters Additional detailed installation and product drawings are available to view/download at www.amx.com FIG. 38 MXD-701 - Dimensions In order to ensure a stable installation, the thickness of the wall material must be a minimum of .50 inches (1.27cm) and a maximum of .875 inches (2.22cm). The mounting surface should also be smooth and flat.
Installing Wall-Mount (MXD) Panels Installing the Backbox MXD-1001 Installation Dimensions FIG. 39 and FIG. 40 provide installation dimensions for the MXD-1001: FIG. 39 MXD-1001 Installation Dimensions (front view) Notes: - Dimensions in parenthesis are in millimeters. - These drawings show a Landscape panel. The dimensions are the same for Portrait panels, except for the vertical orientation.
Installing Wall-Mount (MXD) Panels MXD-701 Installation Dimensions FIG. 41 and FIG. 42 provide installation dimensions for the MXD-701: FIG. 41 MXD-701-L Installation Dimensions (front view) Notes: - Dimensions in parenthesis are in millimeters. - These drawings show a Landscape panel. The dimensions are the same for Portrait panels, except for the vertical orientation. Additional detailed installation and product drawings (for both Landscape and Portrait panels) are available to view/download at www.
Installing Wall-Mount (MXD) Panels 1. Prepare the area by removing any screws or nails from the drywall before beginning the cutout process. 2. After ensuring proper placement, cut out the mounting surface for the Backbox, using the included Installation Template as a guide. Making sure the actual cutout opening is slightly smaller than the provided dimensions is highly recommended. This provides a margin for error if the opening needs to be expanded.
Installing Wall-Mount (MXD) Panels FIG. 44 shows the MXD-701 Backbox installation: 2X Installation Clamp for Wall Thickness .37 [12.03] to .98 [.25.0] 4X Knock-Outs Remove for Cable Routing as Needed #4 Screws Note: Additional detailed installation and product drawings are available to view/download at www.amx.com FIG. 44 MXD-701 Backbox Installation (Landscape) 4.
Installing Wall-Mount (MXD) Panels b. Attach the Ethernet cable and gently push the connection back under the cover. Refer to the Power via PoE section on page 52 for details on PoE and Ethernet Cable Installation and Modification. 8. Test the incoming wiring by attaching the panel connections to their terminal locations and applying power. Verify that the panel is receiving power and functioning properly to prevent repetition of the installation. Do not disconnect the connectors from the touch panel.
Installing Wall-Mount (MXD) Panels Power via PoE Power for the MXD-1001 and MXD-701 is supplied via PoE (Power Over Ethernet ), utilizing an AMX-certified, capacitive touch-compliant PoE injector such as the PS-POE-AT High Power PoE Injector (FG423-81) or other approved AMX PoE power source. The incoming Ethernet cable should be connected to the RJ45 port on the cable attached to the device.
Installing Wall-Mount (MXD) Panels Uninstalling the MXD-1001 The MXD-1001 is held in place via latch hooks and clips in the Backbox. In certain circumstances, such as firmware updates or other maintenance that requires accessing the device’s USB or Micro-USB ports, the device may need to be removed from the Backbox. The clips that lock down the MXD-1001’s bottom edge (Landscape) or right edge (Portrait) may be unlatched in order to remove the device from the mounting surface.
Installing Wall-Mount (MXD) Panels 6. To reattach the panel to its Backbox, repeat the installation procedure. For further information, refer to the video available at www.amx.com (go to Newsroom > Videos > Touch Panels). Uninstalling the MXD-701 The MXD-701 is held in place to the Backbox via latch hooks and clips on the Backbox. In certain circumstances, such as firmware updates or other maintenance that requires accessing the device’s USB port, the device may need to be removed from the Backbox.
Installing Wall-Mount (MXD) Panels To facilitate the disconnection, grasp the bottom of the panel (Landscape) or right side (Portrait) and pull gently outward until the side of the panel is free of the snap. Use your other hand to hold stable the front of the touch panel. Always pull on the frame of the touch panel. NEVER pull on the glass edge. 4. When the first side is free, repeat the process with the other. 5.
Installing Wall-Mount (MXD) Panels 56 Modero X® Series G5 Touch Panels Instruction Manual
Upgrading Firmware Upgrading Firmware Overview The latest firmware (*.kit) file for each panel is available to download from www.amx.com. To download firmware files, go to the catalog page for your panel type, and click the link under "Firmware Files" on the right side of the catalog page. The ZIP file that is downloaded via this link contains the firmware (*.kit) file that can be loaded on the panel, as well as release notes and any relevant programming instructions.
Upgrading Firmware Removing All Data From The Touch Panel To reset the touch panel to its factory defaults and remove all data stored in the device: 1. From the Reset & Update menu, select Factory Data Reset to open the Factory Data Reset window (FIG. 52). FIG. 52 Factory Data Reset window 2. To erase all data from the touch panel, click the Reset Device button at the bottom of the window.
Upgrading Firmware Resetting to Factory-Installed Firmware In certain circumstances, it may be necessary to uninstall the current firmware on a touch panel and return the panel to its original factory default firmware. To reset the touch panel to its original factory firmware: 1. From the Reset and Update menu, select Update Firmware to open the Firmware Update window (FIG. 54). FIG. 54 Firmware Update window 2. From the Firmware Update window, select the Revert to Factory Firmware Version (vX.X.
Upgrading Firmware Installing Previous Firmware In certain circumstances, it may be necessary to revert to a previously installed version of the touch panel firmware.To reset the touch panel to its previously installed firmware via the Settings menu: 1. From the Firmware Update window, select Revert to Previous Firmware Version (see FIG. 54 on page 59). If no previous version is available, this field is disabled. 2.
Upgrading Firmware FIG. 57 KIT File Browser window 4. Select the KIT file to be installed. 5. The device will now upload the new firmware (FIG. 58) and then reboot. FIG. 58 Update Progress display For more information on updating firmware for your touch panel, please refer to the Modero X Series G5 Programming Guide, available at www.amx.com.
Upgrading Firmware FIG. 59 TPDesign5 File Browser window 4. Select the files, and press OK. 5. The pages will be uploaded to the touch panel. Removing User Pages From a Touch Panel In order to remove user pages from a Modero X Series G5 touch panel: 1. From the Reset and Update menu, select Remove User Pages to open the Remove User Pages window (FIG. 60). FIG. 60 Remove User Pages window 2. To return to the Reset and Update menu without saving any changes, click No.
Upgrading Firmware Upgrading Firmware Via NetLinx Studio (v3.4 or Higher) G5 touch panels use an Ethernet connection for programming, firmware updates, and touch panel file transfer via NetLinx Studio. If you have access to the panel’s network, you may transfer files directly to the panel through NetLinx Studio. NetLinx Studio (v3.4 or higher) features the ability to transfer G5 firmware files directly to a G5 touch panel via HTTP (via a stand-alone web server).
Upgrading Firmware FIG. 62 NetLinx Studio v3.4 or higher - Send To NetLinx Device dialog - G5 Firmware file sample 6. Click Send to initiate the firmware file transfer. The progress of the transfer is indicated in the progress bars 7. The Panel will display the Message "Updating System Files", then restart itself. 8. The Installing System Update page will be displayed on the panel until the firmware upgrade process is complete. At this point, the panel will reboot and open it’s home page.
Upgrading Firmware File Size Time Required to Complete Transfer (legacy file transfer method) 0-150MB 10 - 15 minutes 150-200MB 15 - 20 minutes 200-250MB 20 - 25 minutes 250-300MB 25 - 30 minutes 300-350MB 30 - 35 minutes >350MB > 35 minutes By default, Change the HTTP Port used to transfer the KIT file... is selected. Use this option to change the HTTP port assignment, in cases where the IP port (default = 80) is in conflict or blocked on the PC.
Upgrading Firmware 66 Modero X® Series G5 Touch Panels Instruction Manual
Appendix: Troubleshooting Appendix: Troubleshooting Overview This section describes the solutions to possible hardware/firmware issues that could arise during the common operation of a Modero X Series G5 touch panel. Panel Doesn’t Respond To Touches Symptom: The device either does not respond to touches on the touch screen or does not register the touch as being in the correct area of the screen. If the screen is off: The device may be in Display Sleep Mode.
9/14 ©2014 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without notice at any time. It’s Your World - Take Control™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.222.0193 • 469.624.8000 • 469-624-7153 fax • 800.932.6993 technical support • www.amx.
