Specifications
Table Of Contents
- NXA-WAP1000Smart Wireless Access Point
- NXA-WAPZD1000 Smart Wireless Access Point
- NXA-WAPZD1000 Installation
- Preconfiguring the NXA-WAP1000
- Configuring for Management by NXA-WAPZD1000
- Configuring for Standalone Operation
- What You Will Need
- 1. Prepare the Administrative Computer
- 2. Connect the NXA-WAP1000 to the Administrative Computer
- 3. Log Into the AP’s Web Interface
- 4. Configure the Wireless Settings
- Configure Common Wireless Settings
- Configure Wireless # Settings
- 5. Disconnect the AP from the Administrative Computer
- 6. Restore the Administrative Computer’s Network Settings
- Verify NXA-WAP1000 Operation
- Deploy the Access Point
- Troubleshooting Installation
- Browser-Based Configuration Pages
NXA-WAPZD1000 Smart Wireless Access Point
1
NXA-WAP1000 Smart Wireless Access Point
NXA-WAPZD1000 Smart Wireless Access Point
Overview
The NXA-WAP1000 (US operation: FG2255-51; Operation outside the US: FG2255-53), powered by
Ruckus™, is a high-performance 802.11a/b/g/n smart Wi-Fi access point for homes and businesses that
utilizes industry acclaimed Ruckus Wireless Technology. The NXA-WAP1000 can be deployed as a
standalone access point or as part of a centrally-controlled Smart Wireless LAN when combined with the
AMX NXA-WAPZD1000 Wireless LAN Zone Director. With a sleek modern design, small form factor, and
Power over Ethernet (PoE), the NXA-WAP1000 can be mounted on the ceiling to maximize performance
without disturbing aesthetics. The NXA-WAP1000 may be powered via PoE, or via the optional NXA-
WAP1000 Power Supply (FG2255-61).
FIG. 1 NXA-WAP1000 - Front
FIG. 2 NXA-WAP1000 - Back
OPT LED
DIR LED
POWER LED
2.4G LED
5G LED
not used
Hard
Reset
10/100
Port (2)
10/100/1000
POE Port
External
Power