Specifications

Web Interface Pages

NXB-CCG-K NetLinx® Clear Connect™ Gateway

From the Settings tab, DHCP functionality may be enabled or disabled. When DHCP is disabled, the IP address, subnet

mask, gateway, and two DNS servers can be set manually. The DNS name may also be set at this time.

In the Network Settings section, ZeroConfig autodetection may also be disabled, but this is not recommended.

For security purposes, the raw integration port can be disabled or changed via the Telnet enable/disable buttons and the

Telnet port field.

Using the HTTPS Only buttons, the non-encrypted HTTP page may be enabled or disabled. If this is enabled, this forces

users to connect to the device through the encrypted HTTPS page only.

Language Settings

Using the Language section of the Settings tab, the Web Interface pages’ language may be changed to one of four

options. English is the default interface language, but the Web Interface pages may be changed to French, Spanish, or

German.

To change the Web Interface pages to a new language:

1. From the Language section, click on the language you wish to use. This enables the Change Language button

(FIG. 11).

2. Click on the Change Language button to switch the Web Interface language. This may take several seconds

(FIG. 12).

3. The Web Interface pages will now display information in the chosen language (FIG. 13). You may switch back to

any of the four languages at any time.

Settings Tab (Cont.)

Reset: Click this button to return the page to its previous settings without saving any changes.

Update: Click this button to save and update all changes.

FIG. 11

Language section and Change Language button

FIG. 12 Updating Language Settings

FIG. 13 Web interface in French