Specifications

Web Interface Pages
22
NXB-CCG-K NetLinx® Clear Connect™ Gateway
Program Page
The Program page can be used to program Clear Connect devices to respond to scene activations, occupancy events, and
physical keypad button presses (FIG. 39). All programming is done in real time on the system.
Devices Tab
Buttons programmed with the NXB-CCG-K will all have “single action” programming, with the exception of raise/
lower buttons on keypads. This means that presses of either physical or virtual buttons will always send the programmed
devices to their programmed level regardless of the state of the devices. The LEDs on buttons are “scene logic,” meaning
that they are lit when all devices programmed to the associated button are on at the exact levels that are programmed.
The Program page allows you to program devices to buttons. Clicking a button in the Devices tab of the Program page
view will show a window on the right with details on that button (FIG. 40).
FIG. 39 Program - Devices tab
If the device that you are trying to assign to a button or sensor or the device that you
are programming (keypad or sensor) is not physically present or is not powered,
programming will likely fail.
FIG. 40 Device Details