Specifications

Web Interface Pages
24
NXB-CCG-K NetLinx® Clear Connect™ Gateway
Occupancy Tab
Occupancy sensors show up in the Program page in the same way as a keypad or dimmer. The occupied and unoccupied
actions can be programmed individually to loads. This allows you the ability to create a vacancy sensor by not assigning
any programming to the occupied action. Occupancy sensors can be programmed in groups (where occupancy is
determined by the state of all sensors in the group) or individually (FIG. 44).
Clicking on the Occupied Action or Unoccupied Action links for each device displays the Switch Programming pane
(FIG. 45 and FIG. 46).
FIG. 44 Program - Occupancy Tab
FIG. 45 Occupied Action Details tab
FIG. 46 Unoccupied Action Details tab
Switch Programming
Device Name: Displays the name of the device.
Level: Click on the setting to turn the programmed settings on and off.
Remove: Click the link to remove the programmed settings from the switch.