Specifications

Installation
3
NXB-CCG-K NetLinx® Clear Connect™ Gateway
Installation
Important Notes
Codes
Install in accordance with all local and national electrical codes.
Cleaning
To clean, wipe with a clean damp cloth. DO NOT use any chemical cleaning solutions.
DC Adapter Power
RF Device Placement
All dimmers, switches, keypads and shades / draperies must be located within 30 ft (9 m) of the NXB-CCG-K (FIG. 2).
Using a DC adapter not rated at the proper specifications could damage the NXB-
CCG-K and possibly overheat the DC adapter.
FIG. 2 RF Configuration
30 feet (9 m) maximum
NXB-CCG-K
Power Source
Lutron switches/dimmers
Proper orientation of the antenna helps ensure maximum range and the best
performance. The NXB-CCG-K should be positioned centrally to the devices being
controlled, and as high and clear of obstructions as possible. The NXB-CCG-K
utilizes an omni-directional antenna, which produces a circular pattern perpendicular
to the antenna. For best performance, the antenna should be positioned vertically (tip
up or down, not sideways). Try to keep the antenna at least 2 feet from metallic
objects.