System information
Table Of Contents
- Table of Contents
- About Integration
- Integrator's Reference
- QS Standalone
- RadioRA 2
- Clear Connect Devices
- Quantum
- HomeWorks QS
- Devices
- GRAFIK Eye QS
- Energi Savr Node QS/DALI
- Energi Savr Node/EcoSystem
- Energi Savr Node QS/Int'l EcoSystem
- Energi Savr Node QS/Int'l 0-10V/Switching
- Energi Savr Node QS/Int'l Phase Adaptive
- Energi Savr Node 0-10V/Switching
- Energi Savr Node QS for International Motor Module
- Remote Power Modules
- Architrave Keypads
- Signature Series Keypads
- seeTouch QS Keypads
- seeTouch QS Int'l Keypads
- Tabletop seeTouch Keypads
- Hybrid Keypad
- Pico Wireless Controls
- Dynamic Keypad
- Wallbox Input Closure Interface
- Sivoia QS Shades
- Sivoia QS Venetian Blinds
- Maestro Dimmers
- Maestro Fan Speed Control
- Visor Control Receiver
- Radio Powr Savr Sensors
- HVAC Controller
- Wireless Temperature Sensor
- Contact Information
31
Lutron® integration protocol
Setup
Wired
RF
Communication
Repeater Status
1
3
4
2
M
Main Repeater
Power
Repeater Link
COM
9 V
1
N / C
MUX
MUX
2
3
4
AddTest
Integrate
Program / Integrate
RS232
Ethernet
USB
Why Integrate with a RadioRA® 2 Main Repeater?
•
Integrates a RadioRA® 2 lighting control system with a PC or other digital equipment that supports RS232 or
Ethernet TCP/IP communication.
•
Allows monitoring and control of system devices. For example, the Main Repeater can be used to simulate
button presses, report button presses, monitor LEDs, and control light levels of dimmers.
Integration Capabilities
•
100 “virtual” programmable buttons with LEDs (use DEVICE command)
•
Monitoring of changes to other system devices (use MONITORING command)
Additional Commands
•
MONITORING commands are used to program what types of messages the system will report
RadioRA® 2 Integration Access Points
Main Repeater
Model: RR-MAIN-REP-WH, RRK-MAIN-REP-WH