Manualshelf

Specifications

ManualsBrandsAMX ManualsTVs & monitorsNXD-430-BL
21222324252627282930
Installation
11
NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels
3. Remove the appropriate wiring knockouts from the rough-in box (FIG. 7) to accommodate the cables
being threaded through to the touch panel.
4. Thread the incoming Ethernet and USB wiring through the knockouts.
Use of the left wiring knockouts are recommended with this installation.
Leave enough slack in the wiring to accommodate any re-positioning of the panel.
5. Install the drywall/sheetrock before inserting the device into the CB-TP5i.
FIG. 7 CB-TP5i Rough-In Box components