Specifications

NXD-430/435 Touch Panel Accessories

NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels

NXD-430/435 Touch Panel Accessories

Overview

The following section outlines and describes the optional AMX equipment available for the NXD-430 and

NXD-435.

PS-POE-AF PoE Injector

The PS-POE-AF PoE Injector (FG423-80) is a single-port, self-contained Power-over-Ethernet (PoE) power

supply, that delivers both DC power and data to PoE-equipped devices by “injecting” DC power through a

Cat5 Ethernet cable (FIG. 15). The PoE Injector allows devices such as the NXD-430 and NXD-435 to

function without an additional power connection other than an Ethernet connection.

Power-over-Ethernet eliminates the need for an AC outlet at each device installation point, resulting in easier

and less expensive installation. It also can be used to extend the distance between the PoE devices and standard

power outlets by up to 328 feet (100 meters).

FIG. 15 PS-POE-AF Power-Over-Ethernet Power Supply

Each PoE Injector may be used for one device’s power needs. Multiple devices in a

network that require PoE will require multiple Injectors.

PS-POE-AF (FG423-80) Specifications

Output Specifications:

Combined Line and Load 

Voltage Regulation:

Excluding Cord ±1%

Ripple: 1% Vp-p max.

Transient Response: • 0.5ms for 50%

• Load Change Typical

Protection: • Foldback Overcurrent Protection

• Short Circuit Protection

Input Specifications:

AC Input Voltage Range: 100-240VAC -10%, +6%

Line Frequency: 47-63Hz

AC Input Current: • 90VAC Input

•0.6A max.

Protection: • Internal Primary Current Fuse

• Inrush Limiting