Specifications

Configuring Communication
23
NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels
Configuring Communication
Overview
Communication between a NXD-430 or NXD-435 and the Master is done using either USB or ETHERNET
(DHCP or Static IP). Ethernet communication can only be achieved via a direct Ethernet connection.
Modero Setup and System Connection
1. Press the Front Setup Access button (below the touch screen) for 6 seconds to open the Setup page
(FIG. 18).
2. Press the Protected Setup button to open the Protected Setup page and display an on-screen keypad.
3. Enter 1988 into the keypad’s password field and press Done when finished.
Before commencing, verify that you are using the latest NetLinx Master and Modero
panel firmware, and also verify you are using the latest versions of AMX’s NetLinx
Studio and TPDesign4 applications. These are available at www.amx.com.
FIG. 18 Setup page
Connection Status
Protected Setup button
Red indicates no connection to the Master
Green indicates communication with the Master
Clearing Password #5, from the initial Password Setup page, removes the need for
you to enter the default password before accessing the Protected Setup page.