Specifications

Configuring Communication
24
NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels
4. Press the red Device Number field to open the Device Number keypad (FIG. 19).
5. Enter a Device Number for the panel into the Device Number keypad.
Default = 0
Range = 1 - 32000
6. Press Done to close the keypad, assign the Device Number, and return to the Protected Setup page.
7. Press the Front Setup Access button for 6 seconds to open the Status page, and press the Protected
Setup button to open the Protected Setup page (see FIG. 18 on page 23).
FIG. 19 Protected Setup Page
Press to access the on-screen
Press to reboot the panel
Device Number keypad
Press to access the System Settings page
Press to return to the
Status page
When using multiple panels within a NetLinx System, remember to assign unique
Device Number values to each panel, so that all assigned panels appear in the
System listing for the target Master.
Before continuing, open NetLinx Studio. This program assists in developing a System
Number, Master IP/URL, and Master Port number.
Refer to the NetLinx Master’s instruction manual for more information.
Obtain the System Number and Master IP Address from NetLinx Studio. This
information must be specific for the system used with the configured Modero panel.