Specifications

Setup Pages and Descriptions
50
NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels
Panel Information
The Project Information page displays the TPDesign4 (TPD4) project file properties currently loaded on the
selected Modero panel (FIG. 50).
Refer to the TPDesign4 Touch Panel Program instruction manual for more specific information on uploading
TPDesign4 files to a panel. Select between the Info, Config, File, and Project tabs to view the appropriate
information.
Panel Information - Info Tab
FIG. 50 Panel Information Page - Info Tab
Panel Information Page - Info Tab
Connection Status icon: Shows the current state of the panel’s connection to the Master (green = online,
red = offline). See the Connection Status Icon section on page 48 for details.
Panel Type: Displays the model of the Modero panel being used.
Firmware Version: Displays the G4 firmware version being used by the panel.
• Verify that the panel has the latest version from www.amx.com.
Setup Port: Displays the setup port information/value being used by the panel.
Serial Number: Displays the specific serial number value assigned to the panel.
Setup Pages: Displays the type and version of the Setup pages being used by the panel.
Panel Start Time: Displays the last time the panel booted.
Screen Width: Displays the pixel width being used to display the incoming signal on the
Modero panel.
• The maximum available screen width on a NXD-430 panel is 800 pixels.
Screen Height: Displays the pixel height being used to display the incoming signal on the
Modero panel.
• The maximum available screen height on a NXD-430 panel is 480 pixels.
Screen Rotation: Displays the degree of rotation applied to the on-screen image.
File System: Displays the amount of Flash memory available on the Modero panel.
RAM: Displays the available RAM (or Extended Memory module) on the Modero
panel.
Bulb Hours Displays the total time that the panel has been at full brightness.
Back: Returns to the previously active touch panel page.