Operation/Reference Guide NXV-300 Modero© Virtual Touch Panel Touch Panels L a s t R e v i s e d : 7 /2 / 2 0 1 2
AMX Limited Warranty and Disclaimer This Limited Warranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Partner which include AMX Dealers, Distributors, VIP’s or other AMX authorized entity.
Table of Contents Table of Contents ...............................................................................................1 Overview ............................................................................................................5 Product Specifications .............................................................................................. 5 Installation ..........................................................................................................
@PHE ........................................................................................................................................ @PHP ........................................................................................................................................ @PHT ........................................................................................................................................ @PPA .................................................................................
^BVN......................................................................................................................................... ^BVP ......................................................................................................................................... ^BVT ......................................................................................................................................... ^BWW ...............................................................................
@AKR ........................................................................................................................................ @EKP ........................................................................................................................................ PKEYP ....................................................................................................................................... @PKP .................................................................................
Overview Overview The NetLinx NXV-300 Modero Virtual Touch Panel (FG2263-01) is a small rack-mountable device (similar in size to an NI-700 NetLinx Controller) that allows users to access a network via any PC or Macintosh computer via Virtual Network Connection (VNC). Instead of using an actual touch screen to interface with a network, users navigate to the device using a browser (Internet Explorer, Firefox and Safari for PCs and Firefox and Safari for Macs) and login with a username and password.
Overview NXV-300 Specifications (Cont.) Operating Environment: • Operating Temperature: 32°F - 104°F (0°C - 40°C) • Relative Humidity: 5% to 85% non-condensing • Intended for indoor use only Certifications: • FCC Class B • CE • IEC60950 • RoHS Other AMX Equipment: • PS-POE-AF PoE Injector (FG423-80) • AC-DIN-CS3 DIN Rail Mounting Bracket (FG532-01) • AC-RK Accessory Rack Kit (FG515) The NXV-300 can be used in most AMX networks as a controlling touch panel, as shown in FIG. 2: FIG.
Installation Installation Wiring and Connections To avoid any damage to the electronic component, installation must be performed in an ESD safe environment. The NXV-300 is installed to the NetLinx Master, and passes NetLinx control commands to the Master via Ethernet 10/100 cable, as indicated in FIG. 3: NetLinx Master Ethernet 10/100 Ethernet Switch Ethernet 10/100 NXV-300 PoE injector To Touch Panel To Laptop FIG.
Installation PoE (Power Over Ethernet) The NXV-300 uses CAT5/CAT6 wire via the Ethernet port for PoE power. The maximum power draw for the NXD-300 is 2.2 watts. Use the PS-POE-AF Power over Ethernet Injector (FG423-80) to simplify wiring and installation by eliminating the need for an AC outlet at each point of installation. The NXV-300 can be placed up to approximately 330’ (100 meters) from PoE Injector.
Setup Pages and Descriptions Setup Pages and Descriptions Overview NXV-300 devices allow updates and changes to Setup and Protected Setup pages in the same way as any other AMX touch panel. The main difference is you may make various configuration settings via a web browser on any PC that has access to the NXV-300 device.
Setup Pages and Descriptions 1. With Bonjour for Windows running on a PC that has access to the LAN that the NXV-300 resides on, connect the NXV-300 to the network (see Wiring and Connections section on page 7). 2. Select the device from the Bonjour list of devices on the browser. 3. The browser will bring up the main touch panel page. To open the Setup pages, press and hold the Reset Button on the front of the device for 5 seconds. 4. Access the Protected Setup pages, using your password if necessary.
Setup Pages and Descriptions Status The Status page (FIG. 7) is the first page viewed when entering the Setup page interface from the main touch panel pages. The Status page may be reached by pressing and holding down the Reset button on the front of the device for six seconds. Display Current time Info Date Protected Setup FIG.
Setup Pages and Descriptions Display The Display Page (FIG. 8), accessed by pressing the Display button on the Status page, allows adjustment of the default panel settings. FIG. 8 Display Page The elements of the Display page are described in the table below: Display Page Elements Connection Status icon: This visual display of the connection status allows the user to have a current visual update of the panel’s connection status regardless of what page is currently active.
Setup Pages and Descriptions Panel Information The Project Information page displays the TPDesign4 (TPD4) project file properties currently loaded on the selected Modero panel (FIG. 9). Refer to the TPDesign4 Touch Panel Program instruction manual for more specific information on uploading TPDesign4 files to a panel. Select between the Info, Config, File, and Project tabs to view the appropriate information. Panel Information - Info Tab FIG.
Setup Pages and Descriptions Panel Information Page - Config Tab FIG. 10 Panel Information Page - Config Tab The elements of the Panel Information page Config tab are described in the table below: Project Information Page - Config Tab Elements Connection Status icon: This visual display of the connection status allows the user to have a current visual update of the panel’s connection status regardless of what page is currently active.
Setup Pages and Descriptions Panel Information Page - File Tab FIG. 11 Panel Information Page - File Tab The elements of the Panel Information page File tab are described in the table below: Project Information Page - File Tab Elements Connection Status icon: This visual display of the connection status allows the user to have a current visual update of the panel’s connection status regardless of what page is currently active.
Setup Pages and Descriptions File Information Page - Project Tab FIG. 12 Panel Information Page - Project Tab The elements of the Panel Information page Project tab are described in the table below: Project Information Page - File Tab Elements Connection Status icon: This visual display of the connection status allows the user to have a current visual update of the panel’s connection status regardless of what page is currently active.
Setup Pages and Descriptions Protected Setup Page The Protected Setup page (FIG. 13) centers around the properties used by the panel for proper communication with the NetLinx Master. Enter the factory default password (1988) into the password keypad (please refer to the Password Page section on page 24 for more information) to access this page. Password System Settings Connection Panel Utility Statistics G4 Web Control Settings FIG.
Setup Pages and Descriptions Protected Setup Page Elements (Cont.) Reset Settings: • Press this button to wipe out all current configuration parameters on the touch panel (such as IP Addresses, Device Number assignments, Passwords, and other presets). - Pressing this button launches a Confirmation dialog which asks to confirm your selection. - This dialog is configured with a delay timer that does not enable the YES button for 5 seconds.
Setup Pages and Descriptions Pressing the Function Show button once displays the function information on each button and slider in the Setup and Protected Setup pages (FIG. 14). Press the button again to hide the function information. FIG. 15 Button/slider Function Show example Protected Settings Page Icons The interface for the Protected Settings page includes buttons featuring icons instead of text.
Setup Pages and Descriptions System Settings Page The System Settings page (FIG. 17) sets Primary and Secondary DNS Address information with its corresponding IP communication parameters, sets NetLinx Master communication settings, and reads the device number assigned to the Modero panel. Select between the IP and Master tabs to view the appropriate information. Changes made on any tab of this page are not saved until the panel is rebooted.
Setup Pages and Descriptions System Settings Page - IP Tab Elements (Cont.) Primary DNS Sets the address of the primary DNS server used for host name lookups. • DNS (Domain Name System) is software that lets users locate computers on a local network or the Internet (TCP/IP network) by host and domain. The DNS server maintains a database of host names for its domain and their corresponding IP Addresses. Secondary DNS Sets a secondary DNS value to the panel.
Setup Pages and Descriptions System Settings Page - Master Tab Elements (Cont.) Mode: Cycles between the different connection modes (URL, Listen, NDP(UDP), URL(UDP), and Auto): • Auto - In this mode, enter the System Number and a username/password (if applicable). This mode is used when both the panel and the NetLinx Master are on the same Subnet and the Master has its UDP feature enabled. - The Master IP/URL field is read-only because the panel obtains this information from the communicating Master.
Setup Pages and Descriptions G4 Web Control Page The G4 Web Control page (FIG. 19) centers around enabling and disabling both the display and control of your panel via the Web. An external computer or Netbook running a VNC client such as Bonjour, installed during the initial communication to the G4 panel, makes this possible. FIG. 19 G4 Web Control Settings page The NXV-300 supports the open standard Virtual Network Computing (VNC) interface.
Setup Pages and Descriptions G4 Web Control Page Elements (Cont.) Max Connects This field displays the maximum number of users that can be connected simultaneously to the target panel via the Web. Click on the field to change the maximum number. • Default value is 1. Connect Count This read-only field displays the current number of users connected to the target panel via the Web. This value cannot exceed the Maximum number field.
Setup Pages and Descriptions Panel Statistics Page The options on the Panel Statistics page allow you to track the connection status for the panel. The Panel Statistics page tracks ICSP messages and Blink messages statistics (FIG. 21). Select between the ICSP and Blinks tabs to view the appropriate information. Panel Statistics - ICSP Tab FIG.
Setup Pages and Descriptions Panel Statistics - Blinks Tab FIG. 22 Panel Statistics Page - Blinks Tab The Blinks Tab tracks blinks, which are messages sent by the master once every 5 seconds to all connected devices. Features on this tab are as follows: Panel Statistics Page - Blinks Tab Elements Connection Status icon: The icon in the upper-right corner of each Setup page shows online/offline state of the panel to the master. • Bright red - disconnected • Bright green - connected.
Setup Pages and Descriptions Connection Utility The Connection Utility Page (FIG. 23) opens directly over the Protected Setup Page. Use this page to access the connection information for the panel, such as the panel IP address. FIG. 23 Connection Utility Page Features on this page are as follows: Connection Utility Page Connection Status icon: The icon in the upper-right corner of the utility provides a constant visual i indication of current connection status.
Setup Pages and Descriptions 28 NXV-300 Modero Virtual Touch Panel
NetLinx Programming NetLinx Programming The NXV-300 may be programmed, using the commands in this section, to perform a wide variety of operations using Send_Commands and variable text commands. A device must first be defined in the NetLinx programming language with values for the Device: Port: System (in all programming examples - Panel is used in place of these values and represents all Modero panels).
NetLinx Programming Page Commands (Cont.) @DPG Syntax: "'@DPG-;'" Delete a specific popup page from Variable: specified popup popup page name = 1 - 50 ASCII characters. Name of the popup page. group if it exists. popup group name = 1 - 50 ASCII characters. Name of the popup group. Example: SEND_COMMAND Panel,"'@DPG-Popup1;Group1'" Deletes the popup page ’Popup1’ from the popup group ’Group1’.
NetLinx Programming Page Commands (Cont.) @PPA Close all popups on a specified page. If the page name is empty, the current page is used. Same as the ’Clear Page’ command in TPDesign4. Syntax: "'@PPA-'" Variable: page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On. Example: SEND_COMMAND Panel,"'@PPA-Page1'" Close all popups on Page1. @PPF Deactivate a specific popup page on either a specified page or the current page.
NetLinx Programming Page Commands (Cont.) @PPM Set the modality of a specific popup page to Modal or Non Modal. A Modal popup page, when active, only allows use of the buttons and features on that popup page. All other buttons on the panel page are inactivated. Syntax: "'@PPM-;'" Variable: popup page name = 1 - 50 ASCII characters. Name of the popup page. mode = NONMODAL converts a previously Modal popup page to a Non Modal.
NetLinx Programming Page Commands (Cont.) @PSE Set the show effect for the specified popup page to the named show effect. Syntax: "'@PSE-;'" Variable: popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On. show effect name = Refers to the popup effect name being used. Example: SEND_COMMAND Panel,"'@PSE-Popup1;Slide from Left'" Sets the Popup1 show effect name to ’Slide from Left’. @PSP Set the show effect position.
NetLinx Programming Page Commands (Cont.) PPOF Deactivate a specific popup page on either a specified page or the current page. If the page name is empty, the current page is used (see example 2). If the popup page is part of a group, the whole group is deactivated. This command works in the same way as the ’Hide Popup’ command in TPDesign4. Syntax: "'PPOF-;'" Variable: popup page name = 1 - 50 ASCII characters. Name of the popup page. page name = 1 - 50 ASCII characters.
NetLinx Programming Programming Numbers for Colors, Fonts, and Borders Colors can be used to set the colors on buttons, sliders, and pages. The lowest color number represents the lightest color-specific display and the highest number represents the darkest display. For example, 0 represents very light red, and 5 is very dark red. RGB Triplets and Names For Basic 88 Colors RGB Values for all 88 Basic Colors Index No.
NetLinx Programming RGB Values for all 88 Basic Colors (Cont.) Index No.
NetLinx Programming RGB Values for all 88 Basic Colors (Cont.) Index No. Name Red Green Blue 82 Grey12 51 51 51 83 Grey13 34 34 34 84 Grey2 221 221 221 85 Grey11 68 68 68 86 Grey14 17 17 17 87 Black 0 0 0 255 TRANSPARENT 99 53 99 Font Styles and ID Numbers Font styles can be used to program the text fonts on buttons, sliders, and pages. The following chart shows the default font type and their respective ID numbers generated by TPDesign4.
NetLinx Programming Border Styles And Programming Numbers Border styles may be used to program borders on buttons, sliders, and popup pages. Border Styles and Programming Numbers No. Border styles No.
NetLinx Programming TPD4 Border Styles by Name (Cont.) No. 53 Border styles No.
NetLinx Programming TPD4 Border Styles by Name (Cont.) No. Border styles No.
NetLinx Programming "^" Button Commands (Cont.) ^APF Syntax: Add page flip action to a button if it does not already exist. Variable: "'^APF-,,'" variable text address range = 1 - 4000.
NetLinx Programming "^" Button Commands (Cont.) ^BCB Only if the specified border color is not the same as the current color. Set the border color to the specified color. Note: Color can be assigned by color name (without spaces), number or R,G,B value (RRGGBB or RRGGBBAA). Syntax: "'^BCB-,
NetLinx Programming "^" Button Commands (Cont.) ^BDO Determines what order each layer of the button is drawn. Set the button draw order. Syntax: "'^BDO-,
NetLinx Programming "^" Button Commands (Cont.) ^BMC Button copy command. Copy attributes of the source button to all the destination buttons. Note that the source is a single button state. Each state must be copied as a separate command. The section represents what attributes will be copied. All codes are 2 char pairs that can be separated by comma, space, percent or just ran together.
NetLinx Programming "^" Button Commands (Cont.) ^BMF Set any/all button parameters by sending embedded codes and data. Syntax: "'^BMF-,
NetLinx Programming "^" Button Commands (Cont.) ^BMF (Cont.) For some of these commands and values, refer to theRGB Values for all 88 Basic Colors table on page 35. ’%CF’ = Set Fill Color. ’%CB’ = Set Border Color. ’%CT’ = Set Text Color. ’%SW<1 or 0>’ = Show/hide a button. ’%SO’ = Set the button sound. ’%EN<1 or 0>’ = Enable/disable a button. ’%WW<1 or 0>’ = Word wrap On/Off. ’%GH’ = Set the bargraph upper limit.
NetLinx Programming "^" Button Commands (Cont.) ^BMI Set the button mask image. Mask image is used to crop a borderless button to a non-square shape. This is typically used with a bitmap. Syntax: "'^BMI-,
NetLinx Programming "^" Button Commands (Cont.) ^BNC Clear current TakeNote annotations. Syntax: "'^BNC-,'" Variable: variable text address range = 1 - 4000. command value = (0= clear, 1= clear all). Example: SEND_COMMAND Panel,"'^BNC-973,0'" Clears the annotation of the TakeNote button with variable text 973. ^BNN Syntax: Set the TakeNote "'^BNN-,'" network name for Variable: the specified variable text address range = 1 - 4000.
NetLinx Programming "^" Button Commands (Cont.) ^BOR Set a border to a specific border style associated with a border value for those buttons with a defined address range. Refer to theBorder Styles and Programming Numbers table on page 38 for more information. Syntax: "'^BOR-,'" Variable: variable text address range = 1 - 4000. border style name = Refer to the Border Styles and Programming Numbers table on page 38. border value = 0 - 41.
NetLinx Programming "^" Button Commands (Cont.) ^BSF Set the focus to the text area. Note: Select one button at a time (single variable text address). Do not assign a variable text address range to set focus to multiple buttons. Only one variable text address can be in focus at a time. Syntax: "'^BSF-,'" Variable: variable text address range = 1 - 4000. selection value = Unselect = 0 and select = 1.
NetLinx Programming "^" Button Commands (Cont.) ^BVT Syntax: Set the computer control network port for the specified address. Variable: "'^BVT-,'" variable text address range = 1 - 4000. network port = 1 - 65535. Example: SEND_COMMAND Panel,"'^BVT-500,5000'" Sets the network port to 5000. ^BWW By default, word-wrap is Off. Set the button word wrap feature to those buttons with a defined address range.
NetLinx Programming "^" Button Commands (Cont.) ^ENA Enable or disable buttons with a set variable text range. Syntax: "'^ENA-,'" Variable: variable text address range = 1 - 4000. command value = (0= disable, 1= enable) Example: SEND_COMMAND Panel,"'^ENA-500.504&510.515,0'" Disables button pushes on buttons with variable text range 500-504 & 510-515. ^FON Font ID numbers are generated by the TPDesign4 programmers report.
NetLinx Programming "^" Button Commands (Cont.) ^GLH Change the bargraph upper limit. Syntax: "'^GLH-,'" Variable: variable text address range = 1 - 4000. bargraph limit range = 1 - 65535 (bargraph upper limit range). Example: SEND_COMMAND Panel,"'^GLH-500,1000'" Changes the bargraph upper limit to 1000. ^GLL Change the bargraph lower limit. Syntax: "'^GLL-,'" Variable: variable text address range = 1 - 4000.
NetLinx Programming "^" Button Commands (Cont.) ^GSN Change the bargraph slider name or joystick cursor name. Slider names and cursor names can be found in the TPDesign4 slider name and cursor drop-down list. Syntax: "'^GSN-,'" Variable: variable text address range = 1 - 4000. bargraph slider name = See table below. Example: SEND_COMMAND Panel,"'^GSN-500,Ball'" Changes the bargraph slider name or the Joystick cursor name to ’Ball’. ^ICO Set the icon to a button.
NetLinx Programming "^" Button Commands (Cont.) ^JST The alignment of 0 is followed by ',,'. The left and top coordinates are relative to the upper left corner of the button. Set text alignment using a Syntax: numeric keypad "'^JST-,
NetLinx Programming "^" Button Commands (Cont.) ^TOP If enabled, Press/Move/Release events are sent to the Master as string events. Enables/disables touch output to Master Syntax: "'^TOP-'" is 0(disable) 1(presses/releases), 2(moves), 3(press/move/release). Note: Move should be used with caution. This setting can generate a significant amount of traffic to the master depending on user interaction.
NetLinx Programming Text Effect Names The following is a listing of text effects names. This list is associated with the ^TEF command on page 55.
NetLinx Programming Button Query Commands Button Query commands reply with a custom event. Each button/state combination has one custom event. Each query is assigned a unique custom event type.
NetLinx Programming These fields are populated differently for each query command. The text length (String Encode) field is not used in any command. Button Query Commands ?BCB Syntax: Get the current border color. Variable: "'?BCB-,
NetLinx Programming Button Query Commands (Cont.) ?BCF Get the current fill color. Syntax: "'?BCF-,
NetLinx Programming Button Query Commands (Cont.) ?BMP Get the current bitmap name. Syntax: "'?BMP-,
NetLinx Programming Button Query Commands (Cont.) ?BRD Get the current border name. Syntax: "'?BRD-,
NetLinx Programming Button Query Commands (Cont.) ?FON Get the current font index. Syntax: "'?FON-,
NetLinx Programming Button Query Commands (Cont.) ?JSB Get the current bitmap justification. Syntax: "'?JSB-,
NetLinx Programming Button Query Commands (Cont.) ?JST Get the current text justification. Syntax: "'?JST-,
NetLinx Programming Button Query Commands (Cont.) ?TEF Get the current text effect name. Syntax: "'?TEF-,
NetLinx Programming Panel Runtime Operations Serial Commands are used in the AxcessX Terminal Emulator mode. These commands are case insensitive. Panel Runtime Operation Commands @AKB Keyboard string is set to null on power up and is stored until power is lost. The Prompt Text is optional. Pop up the keyboard icon and Syntax: initialize the text "'@AKB-;'" string to that Variables: specified. initial text = 1 - 50 ASCII characters. prompt text = 1 - 50 ASCII characters.
NetLinx Programming Panel Runtime Operation Commands (Cont.) @AKP Pop up the keypad icon and initialize the text string to that specified. Keypad string is set to null on power up and is stored until power is lost. The Prompt Text is optional. Syntax: "'@AKP-;'" Variables: initial text = 1 - 50 ASCII characters. prompt text = 1 - 50 ASCII characters.
NetLinx Programming Panel Runtime Operation Commands (Cont.) SETUP Send panel to SETUP page. Syntax: "'SETUP'" Example: SEND COMMAND Panel,"'SETUP'" Sends the panel to the Setup Page. SLEEP Force the panel into screen saver mode. Syntax: "'SLEEP'" Example: SEND COMMAND Panel,"'SLEEP'" Forces the panel into screen saver mode. TPAGEON Turn On page tracking. This command turns On page tracking, whereby when the page or popups change, a string is sent to the Master.
NetLinx Programming Input Commands These Send Commands are case insensitive. Input Commands ^KPS Set the keyboard passthru. Syntax: "'^KPS-'" Variable: pass data: = Disables the keyboard. 0 = Pass data to G4 application (default). This can be used with VPC or text areas. 1 - 4 = Not used. 5 = Sends out data to the Master. Example: SEND COMMAND Panel,"'^KPS-5'" Sets the keyboard passthru to the Master.
NetLinx Programming Embedded codes The following is a list of G4-compatible embedded codes: Embedded Codes Decimal numbers Hexadecimal values Virtual keystroke 8 ($08) Backspace 13 ($0D) Enter 27 ($1B) ESC 128 ($80) CTRL key down 129 ($81) ALT key down 130 ($82) Shift key down 131 ($83) F1 132 ($84) F2 133 ($85) F3 134 ($86) F4 135 ($87) F5 136 ($88) F6 137 ($89) F7 138 ($8A) F8 139 ($8B) F9 140 ($8C) F10 141 ($8D) F11 142 ($8E) F12 143 ($8F) Num L
NetLinx Programming Panel Setup Commands These commands are case insensitive. Panel Setup Commands @PWD @PWD sets the level 1 password only. Set the page flip password. Syntax: "'@PWD-'" Variables: page flip password = 1 - 50 ASCII characters. Example: SEND COMMAND Panel,"'@PWD-Main'" Sets the page flip password to 'Main'. ^PWD Password level is required and must be 1 - 4. Set the page flip password.
NetLinx Programming Dynamic Image Commands The following is a listing and description of each Dynamic Image Command. Dynamic Image Commands ^BBR Set the bitmap of a button to use a particular resource. Syntax: "'^BBR-,
NetLinx Programming Dynamic Image Commands (Cont.) ^RAF Adds any and all resource parameters by sending embedded codes and data. Add new resources. Syntax: "'^RAF-,'" Variable: resource name = 1 - 50 ASCII characters. data = Refers to the embedded codes, see table below. Example: SEND_COMMAND Panel,"'^RAF-New Image,%P0%HAMX.COM%ALab/ Test_file%Ftest.jpg'" Adds a new resource. The resource name is ’New Image’, %P (protocol) is an HTTP, %H (host name) is AMX.
Appendix A: Telnet Commands Appendix A: Telnet Commands Overview The NXV-300 supports Telnet communications. This type of terminal communication can be accessed remotely, via TCP/IP. Telnet is an insecure form of terminal communication, since it does not require a physical connection to the device to connect. Further, the Telnet interface exposes information to the network (which could be intercepted by an unauthorized network client).
Appendix A: Telnet Commands Terminal Commands The Terminal commands listed in the following table can be sent directly to the NXV-300 via Telnet terminal session. In your terminal program, type "Help" or a question mark ("?") and to access the Help Menu, and display the Program port commands described below: Terminal Commands Command Description ----- Help ----- (Extended diag messages are OFF) ? or Help Displays this list of commands.
Appendix A: Telnet Commands Terminal Commands (Cont.) Command PING [ADDRESS] Description Pings an address (IP or URL), to test network connectivity to and confirms the presence of another networked device. The syntax is just like the PING application in Windows or Linux. Example: >ping 192.168.29.209 192.168.29.209 is alive. REBOOT Reboots the NXV-300. Example: >REBOOT Rebooting... RELEASE DHCP Releases the current DHCP lease for the NXV-300.
Appendix A: Telnet Commands Terminal Commands (Cont.) Command Description SETUP Displays the panel setup page. SHOW CONNECTION LOG Shows the connection logs for the panel. SHOW CONNECTION STATS Shows the connection logs for the panel. SHOW LOG Displays the log of messages stored in the NXV-300's memory. The NXV-300 logs all internal messages and keeps the most recent messages.
Appendix B - Troubleshooting Appendix B - Troubleshooting This section describes the solutions to possible hardware/firmware issues that could arise during the common operation of a Modero touch panel. Troubleshooting Information Symptom Solution • During a WebControl connection to a target panel, a G4 When using G4 WebControl to Authentication dialog will ask you to enter the assigned password for communicate with a target panel, a the panel before allowing access.
Appendix B - Troubleshooting Troubleshooting Information (Cont.) Symptom Solution I have more that one Modero panel Multiple NetLinx Compatible devices (such as Modero panels) can be associated for use with a single Master. Each Modero panel comes connected to my System Master with a defaulted Device Number value of 10001. When using multiple and only one shows up. panels, it can become very easy to overlook the need to assign different Device Number values to each panel.
Appendix B - Troubleshooting NXV-300 Modero Virtual Touch Panel 81
7/12 ©2012 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without notice at any time. It’s Your World - Take Control™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.222.0193 • 469.624.8000 • 469-624-7153 fax • 800.932.6993 technical support • www.amx.
