Specifications

Installation
12
RADIA Lighting Control System
Installing RDM Modules Into an Enclosure
Installing any of the RDM modules is an easy task. The individual modules are shipped with the four mounting
screws enclosed.
FIG. 15 illustrates the inside of an RDA-ENC6 enclosure and the mounting slots. The modules are positioned
in the appropriate slot and secured using the supplied screws.
The RDA-ENC2 enclosure contains a ground-terminating lug. The RDA-ENC4, RDA-ENC6, RDA-ENC6B,
and RDA-ENC12B enclosures contain a neutral terminating block and a ground-terminating lug.
To prevent possible personal injury or death, cut off power to the enclosure at the
breaker box before attempting to install any AMX Lighting modules.
FIG. 15 Enclosure module mounting slots and mounting screw holes
Neutral terminal block Ground terminal block
Module mounting slots
Mounting screw
holes for modules
(4 per slot)