User's Manual

Installing Wall-Mount (MXD) Panels
62
Modero X® Series Touch Panels - Installation & Hardware Reference Manual
Installing the Backbox
FIG. 54 provides installation dimensions for the MXD-430:
Use the MXD-430 Installation Template (68-5968-05) to ensure proper placement.
NOTE: Using the included template to select the final placement of the Backbox is highly recommended. The outside edges of the
template are the same dimensions as the touch panel, which allows you to troubleshoot possible conflicts with wall edges, doors, and
other potential obstacles.
1. Prepare the area by removing any screws or nails from the drywall before beginning the cutout process.
2. After ensuring proper placement, cut out the mounting surface for the Backbox using the MXD-430 Installation Template as a
guide.
NOTE: Making sure the actual cutout opening is slightly smaller than the provided dimensions is highly recommended. This
action provides a margin for error if the opening needs to be expanded. Too little wall material removed is always better than too
much.
3. Thread the incoming Ethernet from their terminal locations through the surface opening.
FIG. 55 provides an illustration of the MXD-430 mounting into a solid surface:
FIG. 54
MXD-430 - Installation Dimensions (front view)
Notes:
Dimensions in parenthesis are in millimeters
Additional detailed installation and product drawings are available to view/download at www.amx.com