User's Manual

Table Of Contents

Modero X Series G5 Touch Panels

Modero X® Series G5 Touch Panels - installation & Hardware Reference Manual

NFC Support

X Series G5 touch panels support Near Field Communications™ (NFC) Technology. NFC technology facilitates making transactions,

exchanging digital content, and connecting electronic devices with a touch. NFC transmissions are short-range (from a touch to a

few centimeters), working with existing contact-less card technologies and containing built-in capabilities to support secure

applications. By using NFC technology, users may receive access to touch panels and touch panel pages through access badges

and other card options.

The maximum range for the NFC antenna is 0.5" (12.7mm), but the typical usage range is 0.25" (6.35mm).

The antenna itself is accessible from the front of the panel, 3.25" (82.55mm) from the left corner of the panel and 0.375"

(9.53mm) from the top edge.

When using an NFC device with the X Series G5 panels, align your device’s antenna with the center of the touch panel’s antenna

(FIG. 5):

Active Video Windows - Limitations

The following limitations apply to the display of active video windows on X Series G5 panels:

NOTE: The term "Active Video Windows" refers to any "window" on the touch panel (which could be a Page, Popup, Sub-Page or

Button) that is displaying active video content.

Maximum supported number of active video windows displayed simultaneously on the panel: 2

While this limitation is not enforced (i.e the TPDesign5 application will allow you include any number of video windows in

the panel design), attempting to display more than two active video windows at one time may have a negative impact on

the panel’s overall performance.

Maximum supported resolution for video windows: 720dpi

Maximum supported frame rate for video windows: 30fps

Cleaning the Touch Overlay and Case

X Series G5 touch panels come with the MXA-CLK Modero X Series Cleaning Kit (FG5968-16), which may be used to clean

fingerprints and dirt from the device. This kit comes with cleaning cloths and a bottle of cleaning fluid specifically for use with the

device.

When cleaning the device, do not directly spray the device with cleaning fluid. Instead, spray the cloth and then apply the

cloth to the touch screen.

Do NOT use abrasives of any type to clean the device, as abrasives may permanently damage or remove the device’s finish.

Common Access Card (CAC) Support In MXT/D-2000XL-PAN

Card Type Card Unique Identif ier (UID) Card Data Personal Identity Verif ication (PIV) Card holder UID

15693 8 byte UID Not Supported N/A

14443A Non-Gov't 4, 7 or 10 byte UID (1) Not Supported N/A

14443A Gov't 4, 7 or 10 byte UID (1) Not Supported (2) Not currently

14443B Non-Gov't 4 byte UID Not Supported N/A

14443B Gov't 4 byte UID Not Supported (2) Not currently

FeliCa Not Supported Not Supported N/A

(1) The UID can be a fixed unique number or a random number dynamically generated by the card.

(2) Requires contact card reader (not accessible via NFC)

FIG. 5 NFC antenna location (Tabletop, Landscape and Portrait layouts)

NFC Sensor