Specifications
Table Of Contents
- Vision2 Operation/Reference Guide
- Table of Contents
- Overview
- Wiring and Device Connections
- Installation
- Accessing Servers
- Master Service
- Live (MPEG) Service
- Live (WMV) Service
- Reflector Service
- DVB Service
- Archive Service
- Thumbnail Editor
- Thumbnail Viewer
- Producer Service
- Record Service
Live (MPEG) Service
69
Vision
2
Operation/Reference Guide
Multicast Settings
The following options are available in the multicast section:
Encoding Settings
FIG. 66 MAX Encoder Multicast Settings
Multicast Settings Options
Protocol The protocol setting is fixed at UDP multicast. UDP multicast is the only
supported protocol at this time.
Address This is the multicast address that will be used. This option is pre-configured
and cannot be changed.
Port This is the multicast port number that will be used. This option is
pre-configured and cannot be changed.
TTL This is the multicast TTL that will be used. You can enter a value in the space
provided. This option is pre-configured and cannot be changed.
FIG. 67
MAX Encoder Encoding Settings