User manual

Appendix A: AMX Lighting Curves

RE-DM4 and RE-DM6 RADIA Eclipse Dimmer Modules

FIG. 89 shows the output voltage of a dimmer. Curve D is an alternate version of Curve A. It rolls off the

high end slower and extends the dimming range in the middle with a sharp roll off starting at 25%

dimming level.

 Relay turn on level = 1%

 Dimming Range = 0 - 115 VAC

FIG. 90 shows the output voltage of the RDM-HDC module. Curve D is a variation of Curve A but at a

10% reduction. This curve can be used with 0-10 VDC dimming ballasts using the proper low-end

cutoff.

FIG. 88 Curve D at 240 VAC

FIG. 89 Curve D Voltage output in Volts RMS

FIG. 90 Curve D Voltage output in volts DC