Installation Manual

Important notes: On the above step,some of iPhone user can’t
find the device, how to resolve it?
If you’re using IOS14.0 or above,when you connect the device at the
first time, please shut-off the cellular data of your phone,then go
back to app and refresh it,then you’ll find the device come up,after
connection was done, you can turn on the cellular data of your
phone.
2．WIFI Setting For Remote Control (Remote Mode)
Click the setting button->Choose the “WIFI Setting”->Click
the”Manage Wi-Fi networks” and choose your home wifi and input
your passwords,then click the OK button. Waiting for about 5~10
second.when it shows “online”again, it means the wifi setting is
successful.
After this step was done, the second green light will not flashing,it
means the camera has been connected to router sucessfully, then
you can watch your home and access the live feed at any anytime
from anywhere by your mobile phone (Remote Control)
Note:
1.After input your wifi passwords and config the connection,the
device will restart automatically and wait for the camera to restart,
which will be completed in about 20-40 seconds. During the
connection process, please do not shut-off the device manually.
2.When connecting to WiFi, please make sure input the correct WiFi
password. If the passwords is wrong, the camera will be offline,then
you need to reboot the device and re-pair it.